Amp/ receiver advice for Spendor SP2/3's

These deserve high quality amps and source as other have said.
I run a pair of SP2/2 with vintage 35watt tube monos and they sound great. I have also used a brutish 70watt KT88 tube amp and found they responded well to more power. 
@gjuliani as long as you don't overdrive them, the X1 will be fine. 

I recently picked up a pair of Spendor SP2/3 on the advice of a friend.  I have not had any real stereo equipment for a while and, on a budget, I went out and purchased an NAD D3020.  Its a nice little class D amp and the speakers sound pretty darn good but I want more depth and scale in soundstage.  I am toying with buying a Peachtree Grand X1 but not sure if it is overkill.  In theory, would these speakers be a good match for an amp like the Peachtree X1?  The "rated power handling" on the SP2/3s is 100watts and the X1 puts out an awful lot more than 100watts.  Would it be overkill?

I have used Spendor's since the 70s and would second the "No Receiver" resolution. The British Fidelity amps were very good with Spendors , I use to sell both. British Fidelity was a name used in the US by Musical Fidelity during a period in which that name was trademarked in the US by another company. Their products are , of course , still on the market and are excellent but they have gone up market. Since I do not know your budget I cannot comment but would suggest that a good used tran. amp would probably be better for your current needs than a tube unit.

Hi,

I had a Golden Tube SE40 amp with my first pair of 2/3s and it was a wonderful combo (but requires a preamp as well; I would not recommend the GT preamp). GT is long out of business, however, and it is widely reported that their products had reliablity problems, though I didn't in the year I owned one. Also, for tubes, the ASL products seem excellent buys for the $$; I have heard several of their integrateds with various Spendors and preferred ASL to Jolida. For SS, a used Roksan Caspian would be a great combo IMO.

TLH

Look into the Marantz PM7200 integrated amp. It has 95 watts per channel. You cannot do better for the money [$500]. [Huge Caveat: I am biased because I sell these amps. But counterpoint: I sell Plinius and TacT and Creek, but they are expensive. I have been looking for reasonably priced electronics to drive the Spendor speakers that I sell and I have not found anything better than this Marantz amp.] Write me directly if you want to know more.

I bought a "British Fidelity" amp which works very nicely for my Spendors. Bought used from a dealer who told me that when Spendors were first brought into the US, they were demonstrated with Britiswh Fidelity amps. I have learned nothing else about the BF amps, but I do like it. I'm curious about a tube amp though. Stephen

15 to 20 quality tube watts will power your speakers fine. I used an Audio Note SOR (17 single ended watts) and it worked very well. A quality 300b push/pull such as the Sun monoblocks or a custom design would serve you well. If you want a custom amplifier made that will fulfill your needs with custom transformers and only the best parts please contact 3D Audio at 925-408-1522. Alex, the engineer, will be happy to discuss you needs and make suggestions as well as give you an idea of pricing.

I would forget the receiver idea, these speakers are worthy of far better electronics, the better the source, the better the electronics the MUCH better these will sound. I mean yes a reciever will play them but not to their potential.