xti16
Responses from xti16
| Mission 765 Problems Since you can duplicate and resolve the symptom by putting pressure on the speaker terminal I would have to say there is a good starting point. I would start by tightening all connections and re-soldering (if soldered)any connection to the speaker... | |
| Best used speaker cable to match my system on Agon If you are considering the Nordost try to demo the Nordost hiemdalls if they are in your budget. I have a nordost demo case right now and I find the blue haven to be a little on the bright side compared to the hiemdalls and freys. As you move up t... | |
| Best way to hook-up a cd player to Krell 400xI Personally I would say get rid of the marantz even if you were thinking using it as a transport and get a nice cdp. Or get a good transport and dac. Balanced outputs do have some advantages (noise rejection and HIGHER output [real useful on long i... | |
| cables for Lavardin/ Living Voice combo ?? I'm looking to regain some air and sound stage that I hadThe Nordost Frey's just gave me that Although I have different equiptment. I also loaned some Nordost cables (Baldurs and heimdalls) to my Brother in law and he said there was a lot more 'ai... | |
| Best way to hook-up a cd player to Krell 400xI The amp does not have an optical cable or Coax output?You mean input.Connect your player to the Krell using either Xlr or Rca cables. Optical or coax inputs/outputs are generally used between Transports and Dac's | |
| Vote for your "Favorite Christmas Music CD or LP" Any of the Mannheim Steamroller Christmas cds followed by Trans Siberian Orchestra | |
| Adding a subwoofer to a 2 channel amp Another option would be a Rel sub using the high level inputs which gets connected to the speaker posts on the back of the amp if there is no sub out on the pre | |
| What would happen if? I personally would not do it for 2 reasons. 1 - You just added antenna's to the amps output. 2 - Accidentlly touching the ends that are not being used. | |
| Replace au24 speaker cable??? Try to demo the Jps Superconductor 3's. I just demoed them and was very impressed. I personally never heard the AU24's but the dealer who let me demo the Jps and is also is a retailer for the AU24's (not local) say's the Jps is no comparison. He a... | |
| REL subwoofer cable Hi Al - here is why I wrote thatI have found the technical reasoning is thrown out the window in this hobby. I am an IEEE and there is no reason for why pc's ic's and speaker cables sound so different (better and worse than others). I did just gav... | |
| REL subwoofer cable When I got my Rel B3 it came with a 35' cable. Hooked it up and after about a month I thought it was sounding good but not great. Then it dawned on me my speaker cables are only 10'. I cut the cable in half and to me it sounded a world better. But... | |
| Best high end monitors? Dynaudio C1's is my first choice followed by the Sonus Faber Creamora-M's then the Usher Tiny Dancers. First 2 are about the same price with the ushers being about 1/2 that (not having a price range its hard to recommend anything). Personally I ow... | |
| Dynaudio C1 vs C2 IF I had the C4's yes I would get rid of the sub but from what listened to the sub would still be needed with the C2's but at a slightly lower crossover point. Only at high listening levels I may disconnect the sub | |
| Dynaudio C1 vs C2 I just made that comparision at my dealer but without the sub. The reason for no sub was because both me and the dealer have Rel subs. The dealer and I find the bass from either the C1 or C2 is faster and tighter than the Rel. I did the comparisio... | |
| Static-like Sound from Tweeter? Try reversing the right and left channel from the source (since its the easiest) and does stay in the 1 tweeter? If so I personally would reverse the speaker connections to determine if its the source speakers amp or preamp. |