theflattire
Responses from theflattire
Upgrading from a VPI Aries 1- is it worth it? I would upgrade the phono stage. I use a Modwright PH9.0XT with my Prime. | |
Some cartridge recommendations Audio Technica OC9 or Hana | |
A phono preamp with equalization selector Gold Note | |
Bottleneck / Upgrade Recommendations - Yamaha RVX-475 Receiver, Pro-Ject Phono Box MM that phono box isn't doing you any favors | |
Upgrade My Turntable - How Much Do I Need to Spend? @hikerneil IMO, most onboard phono stages are ok at best. Phono stages cost from $20 to $20k. I don't think you have a reference phono stage tucked away in your Mac. A good phono stage should also have a dedicated power supply, something an o... | |
Upgrade My Turntable - How Much Do I Need to Spend? Get a good phono stage, something in line with the TT you get. My phono stage cost more than my TT. A used Rega P8/10 would be nice. RB880 and RB3000 are nice. I got a used VPI Prime for $3k and am happy. I think $3-4k is a good range; most o... | |
Amp, Preamp, two volume pots, there can be only one! Like others have said, run up the amp to the noise floor. Let the pre do the rest. | |
Amp, Preamp, two volume pots, there can be only one! My amp has a 100k volume pot and I took my preamp out. It had an Alps, but I changed it out to a TKD. Since I have two sources I got a custom switch box. Less stuff in the signal chain the bettter I say. When I did run a preamp, I believe I di... | |
Started with $1k speakers … what now? IMO, your space is going to define what speakers are an upgrade. I sit about seven feet in front and my speakers, Klipsch RP5000s are less than four feet apart. I would upgrade them if I didn't feel it would be a waste of money, since the space... | |
SUT experience 👍 | |
EAR 834P - Sale or try and repair... @bigkidz Which Vcaps do you like? Right now I'm using a mix of Miflex and Mundorf on my clone. | |
Seeking Legit Cartridge Expert? Harry Weisfeld | |
Seeking Legit Cartridge Expert? I think HW said he heard no difference between the gimbal and uni-pivot. The difference I think is in the arm construction/thickness. Some folks just don't get the uni-pivot. | |
EAR 834P - Sale or try and repair... @abp689 I have Hashimoto HM-7s and a James Audio SUT. I also had some Ned Clayton built Cinemag 1254s and they were nice too. If you google EAR upgrades you'll get a boat load. Minimum I would do the caps. | |
Safe to use an old Sumiko Talisman Virtuoso B? I have a Talisman A and I've read where the suspension could be suspect on older carts. Not sure if the Virtuoso is the same engine, but I think if it rides okay should be good to go. Mine went out to Joseph and he never mentioned anything but i... |