rwwear
Responses from rwwear
| Tube pre amp with 2 outputs for Biamping What's the difference whether the Y connector is on the inside or the outside of the preamp? | |
| digital tuners I think Unsound is talking about RDS which is a different thing alltogether than digital or satelite radio. | |
| Safely combining 2ch. and HT. You should be able to use it this way but try it and see. If it feeds back, it will only be noisy. If it is disconnect it. It won't actually harm anyhing. | |
| I need a phono preamp and I'm leaning toward Krell I have used the Krell phono preamp and it is one of the best. The only thing that I have heard better is my Counterpoint SA-9 but it has 19 tubes and is a little bit noisier. | |
| Add an amp to my receiver ?? Yes, you are correct. | |
| Safely combining 2ch. and HT. There should be no problem if you use the digital out from your CD player into the HK. Or you can try Y cables from the analog output of your CD player if it only has one pair of analog outs and see how that works. But, if you have a DVD player, i... | |
| hum with VPI Jr Check to make sure that all interconnects are plugged in all of the way. Also, check the cartridge leads. | |
| digital tuners The new digital radio format will not be compatible with over-the-air broadcast radio. It is totally digital like DBS and Dish TV and will require a satellite dish or digital antennae to receive it as well as a digital radio. It is also a pay serv... | |
| Converting to Analog You can get great analog sound for a lot less than you think. There is, as we speak, a Technics SP-10 MKII for a mere 599.00 including shipping here on Audiogon. You will have to add a tonearm and cartridge. | |
| Are "Professional Grade" CD players good? My Sony 707ES has XLR outs. | |
| CDR Burning compatibility with DVD players I always use cheap CDRs, they seem to work best. | |
| DVD Regions - Any Workaround? The Sampo that I bought has the Pal, NTSC converter built in. They are the same machines that Sharp sells. Of course, Sharp covers up the button to switch between PAL and NTSC on the remote. Some people have drilled a hole in the remote to access ... | |
| Why Expensive power Cables when Romex behind Wall? I agree with Sdcampbell wholeheartedly. | |
| sub not switching on The sub is not getting a constant signal if it is set for such low frequencies. You may have use the always on power switch if it has one. | |
| Acrylic platter replacing rega glass platter It shouldn't change the speed but could put more weight on the bearing and more strain on the motor and belt if heavier. |