mtrot
Responses from mtrot
| Bi-wiring with different cables for HF and LF? Thanks, Ssglx!I will look up those Mapleshade Golden Helix | |
| Bi-wiring with different cables for HF and LF? Bear in mind that my amp has two sets of output binding posts, so it is easy to run two separate cables as a "bi-wire" connection. I kind of like the Morrow cables on the top end, just trying to experiment with the LF cable and see if I can improv... | |
| HDMI cables vs RCA/coax for sound in a HT system Just make sure your Rotel processor has multi-channel inputs to connect to your Oppo. | |
| Bi-wiring with different cables for HF and LF? Yes, but for low frequencies, do the cables really need to have the same "voice" as the cables for the highs? How much "voice" can there be with low frequencies. When we talk about bass articulation, at what frequencies does that occur? | |
| Bi-wiring with different cables for HF and LF? "OzzyI am using a pure soft annealed 99999 silver wire as speaker wires.I have 14 gauge on the low end and a 18 gauge on the high end."Where would one find such wire, and what's the cost? That sounds like it might be nice for the low frequency run. | |
| Bi-wiring with different cables for HF and LF? Thanks Tls49!Honestly, I just want to compare some speaker cables on the LF run. I'm not really interested in changing up my components. And I've already experimented a lot with speaker location. Maybe I'll call the cable company and get their tho... | |
| Bi-wiring with different cables for HF and LF? Well, I was thinking my amp was pretty decent, just wanted to get some ideas for the LF run. The amp is a McCormack DNA1 Deluxe Rev.A, which is rated at 150 wpc and is supposed to be good down to 2 ohms. | |
| Bi-wiring with different cables for HF and LF? Well, that's the thing. I haven't tried out that many cables for that LF run, so how would I know if another cable might be significantly better or not? That's why I posed the question. I am looking to maximize my bass impact and heft. | |
| morrow audio I've been using the SP2 for a couple years now. I thought they made an immediate improvement in clarity and imaging over my previous Goertz MI2 speaker cables. The only thing I'm not sure about, due to the small gauge is bass weight and heft. I do... | |
| Cables more hype than value? I just picked up a set of interconnects(installed between receiver and my McCormack amp) that made a pronounced improvement to my sound. If anybody could not tell the difference, they may as well just buy a setup from Best Buy and be done with it. | |
| High Fidelity Cables CT-1designed by Rick Schultz OK, I've had the CT-1 for almost a week now, and I have to say, it's almost like there is some sort of chicanery going on with this product! How can a cable be so far superior to other(fairly expensive) cables? How could it be that, after 40 or 50... | |
| High Fidelity Cables CT-1designed by Rick Schultz First, I don't have much experience with high-dollar cables, but I did want to chime in that I today installed a set of High Fidelity CT-1s between my receiver and my McCormack power amp. These cables replaced my set of Audio Art IC-3s which I hav... | |
| Torn between two IC's... Please help... Let us know your thoughts after you live with the MA-2s for a while. My current setup includes Morrow SP-2 speaker cables and a set of Audio Art IC-3 interconnects. I have to say, the system sounds real good to me, but I always wonder how a set of... | |
| Nordost ICs cause hum, replacement needed. Have you tried Audio Art IC-3? Pretty impressive to me, very clean and neutral with great highs. | |
| Best AV receiver to use as an AV pre amp I've been pretty impressed with the sound quality I am getting from my Onkyo TX-NR809 as pre-pro to my McCormack DNA-1 Deluxe RevA power amp. I get a really nice, defined soundstage on both music and movies. I run a 4.0 system, and I use the Onkyo... |