mcfarland

Responses from mcfarland

Review: Glow Audio Voice One Monitor
Nicely written. Thank you. Happy Listening. 
New to tube rolling, where to purchase tubes?
I wholeheartedly second all of the above suggestions. Not meaning to trash other tube sellers on the 'Gon or on e-bay, there are tubesellers on the net that are quite disreputable, selling fakes, relabeled tubes, used to death tubes, and the like,... 
First tube roll: Which to change?
IMHO, I would really suggest that you just listen to the amp for at least a few months to let it break in and to get some idea of how it sounds, from bottom to top, and how it images. Also, how quiet it is. Find out how it sounds at low volumes an... 
What is the value of an Oracle-Delphi MK-III TT?
Condition is important, the original boxes can help insure proper packaging to prevent damage, and insurance when shipping is also a good idea. Audiogon has a blue book where values can be checked, otherwise, follow the ads and see for yourself wh... 
B+O turntable problem
Your speakers should definately NOT be in the same cabinet as your turntable. Also check your stylus pressure with a suitable gauge, and make sure that the cantilever/stylus assembly is not visually damaged using a magnifying glass. 
MIT Z Stabilizer ll ? operation ??
Actually, I would appreciate the same answers, as I too, own this unit and have noted sonic benefits but have absolutely no idea how this unit would work. 
halp 2nd opinions
If everything is "peachy" when you connect to a different phono pre-amp, then its probably the Pro-Ject tube box. Make sure of all connections, then replace the tubes in the tube box with known good ones. If it still hums, make arrangements to sen... 
halp 2nd opinions
Switch your right and left channel connections to see if the hum changes sides, if it does, the hum may originate from your cartridge headshell connection. 
Shipping Dunlavy SC 3's
Check with Audio-Video Logic of Des Moines/Urbandale, Iowa. They were a dealer for Dunlavy and purchased some left over stock. They may have boxes or advise for you. 
What's the best sounding equipment racks?
Check out the Core Design's products. I bought their equipment racks, and, after receiving them, and seeing firsthand how they are assembled, I truely doubt you can find better, especially considering the price. Constrained layer damping on each s... 
Where can I get Koss Electrostatic phones repaired
I sent mine back to Koss and they repaired them for free. I beleive they have a lifetime warranty. 
A DAC to beat NAD C541i?
MHDT Paradisio or Havana? They are both in your price range. Just a suggestion. Happy Listening, 
how many hours?
Your talking about how long it takes to wear out a diamond by rubbing vinyl against it. I think it's much more likely that you'll damage the cantelever by dropping it or knocking against the table at some point. The only times I've had to replace ... 
Neighbor Complaining...
Try talking to your neighbor and find out what hours would be appropriate and at what volumes. Invite him in for some refreshments and to show him your system. Offer to place your system away from the shared wall (which is closer to the rear wave ... 
What components are manufactured in the U.S.A.?
I believe that Atma-Sphere is manufactured in house (St. Paul, Minnesota), by Ralph Karsten and his rather fine staff.