kr4
Responses from kr4
Building HT, 2 channel audio guy needs help I have no experience with the Met-1 but, from what I know, it is a multichannel analog preamp, similar to the Audio Research MP1 that I have. They cannot do bass management, processing or decoding. You will need to have sources that can do all tha... | |
hdmi connection While I agree with most of what Realremo has said, let me add that MOG's 320kbps lossy stream may not benefit from an improved connections. Also, If your Marantz is a recent model, it may have a compatible USB input obviating the need for an exter... | |
The Marantz 7005 analog output needs help. What help do you think you need? Is this an AV7005 or an SR7005? | |
Is there a problem w/ using both amp inputs? You need to read your manual and/or consult ML about this. If there is no balanced/unbalanced switch on the amp, it is very likely you cannot do what you propose as the two input will interfere.Even if there is a switch, it may only be for the pur... | |
What does REFERENCE mean? It is simply something that you accept as a standard against which other items are compared. One might infer that such a standard is superior to all else but the term does not directly imply that. However, many do use that inference in using the t... | |
New Sony Hi Res Coming This Fall Try these:http://presscentre.sony.eu/Content/Detail.aspx?ReleaseID=8820&NewsAreaID=2&ClientID=1http://www.stereophile.com/content/sony-push-hi-rez-downloadshttp://www.gramophone.co.uk/blog/high-fidelity/at-last-high-resolution-audio-is-abo... | |
Summing up L & R line-level for dual subs Point taken, Lewinskih01. I do tend to be very brief, so it is good that others, like Al, take the time and patience to explain in more detail. | |
Adding 2 channel goodness to existing reciever 1. You can do either. Just adding the amp will give you the quality power to drive better speakers. Adding a good preamp with "HT Bypass" and a good phono stage will give you a separate stereo system with the ability to still use the AVR. Look at ... | |
Summing up L & R line-level for dual subs Also stated in the last paragraph of the first reply. ;-) | |
Can this sub arrangement work, please sub pro's? Sure but then you will have no HP filter on the main speakers. That means (1) increased stress and lowered power handling on them and (2) difficulty in balancing/aligning the subs with them. | |
H/T suggestions for 2 channel? Yes, there are multichannel preamp-processors with analog outputs and there are, also, AVRs with similar outputs. All will decode modern formats. | |
Can this sub arrangement work, please sub pro's? It is hard to know what you are asking. Yes, physically, you can put each Pulsar on top of each sub but you would be advised to put spikes under the subs or otherwise secure them to the floor. Also, you need to determine how much those subs vibrat... | |
Summing up L & R line-level for dual subs Probably too well. Combining the L/R out of the Lamm will probably sum the output to the main amp/speakers. Result: No stereo.If your subs have L/R inputs, you should connect to them independently and let each sub do the summing. Otherwise, you ne... | |
How are AVRs for 2-channel music these days? One should consider an AVR with an analog input/passthrough that avoids any redigitizin of the signals. | |
Oppo BDP-105 ... DMP or DMR DLNA will not support DSD file transmission and that is why I use SMB. |