imhififan
Responses from imhififan
| Smoke on my power amp Plug your amp to a 'Dim Bulb Tester' to find out if any repair is required. https://www.youtube.com/watch?v=wRFRwOnLsZI&t=15s | |
| Lexicon RV-8 https://www.hifishark.com/model/lexicon-rv-8 | |
| Yet another need help with a ground hum thread A isolation transformer may solve your problem https://www.jensen-transformers.com/product/ci-2rr/ | |
| Cool running amplifier @bdgregory Glad I could help | |
| Using a Yamaha RX-V485 Receiver as a pre amp for my Denon AVR 3801 I want to have the Yamaha send the three front channels to the Denon to power my NHT center and NHT Four Speaker. But I don’t see and pre-outs on the Yamaha RX-V485! Using speaker level to line level converterhttps://www.amazon.com/PYLE-PLVHL6... | |
| Speaker Spike Help @gdnrbob Yes, if the speakers phillips screws size less than 6mm and without threaded inserts, your recommendation is much better. BTW, if using a aluminum bar, lower profile spike will be needed. | |
| Cool running amplifier @sfseay I believe OP’s preamp is on 24/7 and I think he has to try those outlet to be sure. | |
| Anybody Heard the CODA v2 multichannel Amplifier? Sorry I don't have any experience on both v12 and s12.5, however, IMO/IME one better amp preforms better than two lesser amp passive bi-amping. On paper, the s12.5 look like a better amp. | |
| Speaker Spike Help Can you use a 1" aluminum bar mount across the rear end of your speaker using the existing phillips screw holes and put those spikes as outriggers? https://elac-content.s3.amazonaws.com/uploads/2016/01/Uni-Fi-Foot-Web.1349-1500x712.jpg | |
| BEST HARMLESS/SIGNATURELESS SPEAKERS CAPACITORS. JFYI A diyaudio member did some interesting ESR tests:https://www.diyaudio.com/forums/parts/346861-esr-measurements-capacitors.html | |
| Anybody Heard the CODA v2 multichannel Amplifier? Are you talking about the CODA v12 multichannel Amplifier? I think v2 is a Continuum Monoblock Amplifier. | |
| Cool running amplifier @bdgregory You can try a Current Sensing Auto On/Off Outlet instead, plug the TV to ’Tools outlet’ and plug the amplifier to ’Vacuum/Accessory outlet’. , The amplifier will automatically turn on when you turn on the TV and amplifier will automatic... | |
| Why not put crossover networks in accessible compartments? Isolating the crossover from vibration is a good thing, easily accessible compartments that allow changing components is a different thing, how often a speaker need to replaces crossover parts? I believe encase in resin helps isolating the crosso... | |
| Cool running amplifier Sunfire symphonic reference power amplifier, 250 watt 8ohm doubled to 500 watt 4ohm. Auto input signal turn on is a nice ’set and forget’ feature, Load invariant technology which allows the amp to put out tremendous amounts of power while generat... | |
| Best way to A / B test amps? Use a switch? Problematic if you are talking about tube gear that doesn't like to be on when no speakers are connected, but no problem with solid state. Connected to a dummy load resistor before disconnecting speaker from a tube amp can solve the problem, an... |