imhififan
Responses from imhififan
| Pairing of different JL Audio Subwoofers the F112 has a XLR output and the E112 does not accept XLR input. A xlr to rca adapter should get the job done. | |
| Accuphase E-260 Voltage Conversion (100V to 230V) Abhishek, Glad I could help | |
| Does speaker-level input to sub by pass its electronics? I’ll ask Ayre if they see a problem with high-level input from the A7e to a sub, but now I doubt they will. https://forum.audiogon.com/discussions/subwoofer-for-ayre-ax-7e?sort_order=asc almarg9,670 posts04-01-2018 10:13am In addition to the fac... | |
| Can anybody please help me identify a plug socket Those socket look like mil spec circular connectors for microphone connections. https://uk.rs-online.com/web/c/connectors/circular-connectors/mil-spec-circular-connectors/?applied-... https://www.ebay.com/itm/New-Unused-14-9-Plug-2-pin-Connector-f... | |
| Schiit Freya + and reel to reel question You can use a source selector and some Y adapter/cable to build your own Tape monitor/loop. On the source ( CD and phono stage ) output connect a pair of Y adapter/cable, one end go to Freya+ input, another end go to source selector input, the ... | |
| DSP TO TAME THE BASS IN HARBETH SPEAKERS audiophile quality DSP with balanced connections https://www.deqx.com/products/premate-plus/http://www.accuphase.com/model/dg-68.html | |
| DQ-LP1 Transformer The DQ-LP1 use a 35mA transformer, to accommodate new opamps with higher current draw, a transformer with 100mA capacity should be adequate. You can find some low profile transformer like this one and not to concerned with being unable to put ... | |
| Can anyone identify the model of this speakers? Those baffles don’t look original, repair work? | |
| Favorite used tonearms under 1000 dollars I've a 48 years old Sony PUA1500L still works perfectly. https://www.vinylengine.com/library/sony/pua-1500.shtml | |
| Combining 2 channel audio and home theatre if i just connect a 2 channel Power Amp to my AVR, will it have a noticeable good difference in the audio quality? A high quality integrated amp with HT bypass or power amp definitely will be an improvement, but for the budget of $700, I doub... | |
| Best driving music. Engine note https://www.youtube.com/watch?v=4lQPc9VXBzk | |
| OK here is the challenge for you Don't forget the listening room size! A 100 sq ft and a 500 sq ft room the equipment choice can be very different. | |
| Best method to connect subwoofer to amp IME, I always found that a good high pass filter greatly improve dynamic and clarity on small 2 way monitors. | |
| Best method to connect subwoofer to amp My goal is to stop the low bass from playing on my stand-mounted speakers so they can concentrate their efforts on the mid bass on up. If that’s your goal, a high pass filter is a must! Since your integrated amp not possible to insert a line level... | |
| DSpeaker Antimode 2.0 or 2 more Subs? So that brings me to a different option for smoothing out the bass and that would be to add a pair of sealed, wireless, dsp 8” subs. dsp subs! Kill two birds with one stone : ) |