imhififan
Responses from imhififan
| Most Beautiful Receiver / Integrated - Ever was... ? Meridian F80 http://www.adventuresinhifiaudio.com/wp-content/uploads/2010/03/imagegen.ashx_.jpg | |
| Where to find steel dome cones for speakers Looks like those are not the ones I recall want. I’ve seen ones specifically for audio equipment that were half spheres and about 1.5 to 2 inches in diameter. http://magico.net/product/qpod.phporhttp://shop.mapleshadestore.com/Radiused-Footers/pro... | |
| Where to find steel dome cones for speakers https://www.ebay.com/i/321944896919?chn=ps&dispItem=1 | |
| Where to find steel dome cones for speakers Acorn Cap Nuts ?https://www.zoro.com/value-brand-cap-nut-m20-250mm-gr-a2-ss-plain-6ce11/i/G2144186/ | |
| Preamps with two main-outs it appears that what is most likely a relay is connected directly between the signal pin and the ground sleeve of the RCA input connector on each channel. Presumably when the warmup period concludes a control voltage is applied to the relay w... | |
| Update on Teres 340 Speed Stability Problem artemus 5,Thanks for the update. | |
| Preamps with two main-outs kalali,Can you use a ohm meter to check the input of the SP331 when it is power down to confirm that the input is shorted? | |
| Preamps with two main-outs I just did an experiment. Powered everything down and disconnected the ICs going to my Vincent SP331. Turned on the preamp and the MC2200s and they sounded fine. Powered everything down and plugged the ICs back in SP331 without turning it on,... | |
| Marantz TT-15S1 anyone with experience fitting an electronic speed box? If your table run a little faster or slower, a speed controller can correct it, another benefit is you don't need to move the belt/pulley for 33.3 to 45, just push a button like a DD table.a guy from stevehoffman forum use a Project speed box with... | |
| Best / Cheapest desktop micro-amp? MUSICAL FIDELITY - V90-AMP USB $149 free shipping and 60 days satisfaction guarantee from Music direct | |
| Need Adcom GFA-565se info On page 9 of the user manual:All loudspeaker systems having a nominal impedance down to 2 ohms can be connected to, and driven by, the GFA-565SE. The GFA-565SE can drive these low impedances at more than adequate power levels with no difficulty. l... | |
| Can This Amp Power A 50 Foot Speaker Cable Run? I ’m with zavato, the cable should be ok, most important thing to consider is the amp has enough power for such a big theater room without clipping and destroy the speakers! http://myhometheater.homestead.com/splcalculator.html | |
| HELP AFTER MY MODS, My tweeters are subdued and weak- Tim, my guess is a combination of difference of ESR and those old electrolytic caps dried out and out of specs, so a tester that can check the value of the caps and ESR will give us the answer.One thing that surprised me was the cables made such... | |
| HELP AFTER MY MODS, My tweeters are subdued and weak- Btw, all cap in the crossover should be bipolar/non-polarized, therefore the two 2200uf connected back to back. | |
| HELP AFTER MY MODS, My tweeters are subdued and weak- Yes, C1,3 and 4 must use bipolar cap |