imhififan
Responses from imhififan
| Why are my crossovers different Why not get a meter and measure the actual value of caps from both crossover and go from there? | |
| Counterpoint - Alta Vista - Mike Elliott @musictech Some pictures of SA-5.1, don't know its help?http://amp8.com/vv-amp/counterp/sa-51.htm | |
| Empire 598 Tonearm choice This is the link provided by czariveyhttp://www.esotericsound.com/ArmsAndHeadshells.htm | |
| I wish I had a device that would delay lowering my TT arm @mazikravhttps://www.youtube.com/watch?v=ZsOpvysVTp4 | |
| I wish I had a device that would delay lowering my TT arm What would be a potential object that could perform this action? Not everyone is able to have the TT ’at hand’, but it could be interesting if it could raise as well as lower the arm in a remote fashion. I tape a 6" X 1/16" diameter rod on top of ... | |
| I wish I had a device that would delay lowering my TT arm http://turntable-tuneup.com/silicone-damping-fluid/http://turntablebasics.com/silicone.html | |
| Subwoofer speaker outputs to increase efficiency @rfprice Now we know your integrated is a 300b set, what is the speaker?Is it bi-ampable?The integrated has pre-out? | |
| best matching full range speakers for sx880 pioneer (60W rms per channel) Infinity Interlude IL40, -6dB @ 35Hz, hard to beat at a used price of under $300 http://timg.danawa.com/prod_img/large/group_33/16964_2.jpg | |
| Fuses fuses fuses Thanks | |
| AC power supply for Nottingham Analogue Can you DIY?http://www.diyaudio.com/forums/analogue-source/300371-60-wpc-amplifier-diy-turntable-motor-drive.htm... | |
| Fuses fuses fuses good fuse-holders are generally copper alloy, silver plated in many cases, are available. Non magnetic direct plating, in some. (no magnetic intermediary plating, ie nickel based) Any recommendation? | |
| Fuses fuses fuses Why put a $50 fuse in a $0.5 fuse holder? Any audiophile approved fuse holder in the market? | |
| Mark Levinson has odd choice for cap upgrades in one of their service bulletins. Why? There are identical PP caps sprinkled on the current gain board yet ML did not make those cap changes mandatory. The current gain board is the heat generating furnace yet they don’t seem concerned that those PP caps are steadily being warmed. ... | |
| Mark Levinson has odd choice for cap upgrades in one of their service bulletins. Why? I tried to see if the caps I need could be found with a C0G designation but caps of such small capacitance were not available with that designation. I found some radial C0Ghttp://www.mouser.com/Passive-Components/Capacitors/Ceramic-Capacitors... | |
| Most aesthetic classic turntable I don't think of a table from the 80's as old enough to be a "classic"How about thishttps://previews.123rf.com/images/espada533/espada5331406/espada533140600073/29292460-Isolation-Old-... |