atdavid
Responses from atdavid
| The Truth About Power Cords and there "Real" Price to Performance You would think with all that cost of the SR and ET power conditioning units, that they would get rid of almost any noise. | |
| What is wrong with audiophiles? Unless they are moving, like in a cable conducting electricity, in which case they are affected by stationary magnets (you know like in a CRT that requires degausing).geoffkait18,235 posts11-14-2019 8:05amFurthermore, electrons have an electric c... | |
| How much do you need to spend to get digital to rival analog? Again, we/you were talking DACs, and I have copied that "qualities" you have associated with "Feedback" below. None of these properties you have assigned to "Feedback" apply to a Delta-Sigma DAC. Anything that appears as feedback in a Delta-Sigma ... | |
| The Truth About Power Cords and there "Real" Price to Performance I think there is more practical value in dodgealum's post than most other posts in this thread. What you are plugging into is going to make a much bigger difference than anything w.r.t. equipment interactions. Some observations:Good shielding is n... | |
| What is wrong with audiophiles? You can try to twist the words anyway you like, but it does not change the words you wrote. One time you said 4 "Cable Elevators" per side, which in your parlance is branded Cable Elevators. The other time you said, "cable elevators", "One, On one... | |
| What is wrong with audiophiles? Okay, Pinocchio ...The improvement from a set of cable elevators is flat-out obvious. Like I said the first time, one friend noticed he could hear the difference removing just one. One. On one side. Out of 6. | |
| What is wrong with audiophiles? Okay Pinocchio,And for the slower ones in the back, you will notice in the second quote, the use of "Cable Elevators", i.e. name branded as per the ops last post, and the distinct 4 per speaker cable.Like I said the first time, one friend noticed ... | |
| How much do you need to spend to get digital to rival analog? Whether it releases on analog or digital, most music in the last several decades was digital right up to the cutting machine. When you say "right", do you mean as you have heard them in an acoustic club? ... or how you think they should sound? | |
| Vinyl / Digital / and can you have too much information. Well if they are much older, then it is an even worse problem as old tape machines had seriously limited top-ends, as did the cutting machines, etc. etc. | |
| What is wrong with audiophiles? Based on the op's own words:He cannot even get the number of cable elevators right (says it was 4 one time, 6 another time).A convenient "engineer" comes up with a red-wine challenge, that makes no sense with experienced wine drinkers especially a... | |
| How much do you need to spend to get digital to rival analog? We are talking DACs here. There is no feedback on a Delta-Sigma DAC.Much else of what you wrote appeared incorrect as well. zalive15 posts11-12-2019 9:56aR2R is basically a natural, straightforward approach in itself. There's no feedback in the ... | |
| What is wrong with audiophiles? I have no idea what is wrong with audiophiles, but if you look close enough, you may find clues. millercarbon OP1,934 posts11-13-2019 1:24amThe improvement from a set of cable elevators is flat-out obvious. Like I said the first time, one friend ... | |
| Vinyl / Digital / and can you have too much information. Penguin,That argument does not fly. Most vinyl in the last several decades is cut from digital. Prior to that analog tape whose frequency response dropped like a brick much past 20khz as did the cutting head/amp. | |
| What is wrong with audiophiles? About -25 years :-) | |
| What is wrong with audiophiles? What's your agenda thyname? You actually troll people on one forum, so you can post about and complain about them on another forum. It would seem the only person with an "agenda" here is you.I don't have an agenda, but I do feel that those on the... |