Paul Klipsch was right - What the world needs is a good 5 watt amplifier


For those who are questioning whether a low power high quality amp would be able to properly drive any speakers I've recorded a short video demonstrating very high SPL level from a speakers with average sensitivity. The video is of very low audio and video quality as its recorded from my smartphone. However, the microphone used for measuring the sound pressure is MiniDSP UMIK-1 and the software used is REW (Room EQ Wizard). During the tests the amplifier didn't show any hint of stress of distortion

The speakers used in this video are Sonus Faber Olympica II and the integrated amplifier is Pass Labs INT-25. According to some third party reviews the Olympica's are thought load for the partnering amplifier as their sensitivity is averagely rated (88db) and the impedance curve drops down to 3 ohms in the bass region with a estimated EPDR (the point where the impedance curve is intersecting with the phase angle) of 1.6 ohms. The pass labs is rated at 25wpc @ 8omh and is said to be stable down to 1 ohm doubling its power at 4 and 2 ohms. According to the manual it can deliver 200wpc @ 1ohm before the protection circuit is activated. 

So, the point of the video is to show that the Pass with its poorly rated power (25wpc) can drive even demanding speakers to insanely loud levels without any sound degradation. 

  

 

celestial__sound

The Topping PA5 ($349) is more powerful than the Pass amp and has lower distortion. Why pay 10X the money for the Pass?  

Measures Good,,,,Sound?...Not so much....I can

t tell you how many components I bought in the last two "Covid Years" that had great reviews/measurements by "Audio Science Reviews" that I had to return because they were unlistenable. I have an Topping MX3 that I use in a sunroom and in that environment it is fine, but no way is it to be compared to my $150 tube amplifier kit (8w/ch) or my Pass First Watt F5v2 (50w/ch).......ASR has really panned the Pass Kit "Amp Camp Amp" (ACA). Called it everything but a total POS. And the specs they posted are horrible. But I've heard quite a few of these little amps and they sound fantastic. Extremely "musical" and do not sound like computer sound cards like most higher power, lower price Class D Chinese amplifiers. Don't get me wrong, I'm a real fan of Class D. This past week I built an ICE Power class D 200w/ch kit and for $300 it is amazing. Not tubes or First Watt, but very, very close......Read all about THAT adventure here... www.rvbprecision.com

I cant tell you how many components I bought in the last two "Covid Years" that had great reviews/measurements by "Audio Science Reviews" that I had to return because they were unlistenable.

IMO too little attention is paid to distortion spectra when amps are measured; IME its one of the more important things to study in an amp. The real problem here isn't the measurements, its what is defined as 'good'.

@celestial__sound 

I've great appreciation for topping devices and with great respect I think the PA5 wouldn't be able to drive those speakers above 80dbs before it will start clipping. Don't rely on laboratory measurements as the music is much more complex and dynamic and it is not 1 KHz sine wave

Measurements don't tell you how a piece of gear is going to sound, no matter what brand, especially not measurements from REW. The music playback in the video didn't sound too great, even considering it's compressed Youtube footage.

The music playback in the video didn’t sound too great, even considering it’s compressed Youtube footage

@divertiti The video is recorded with my 70$ smartphone (huawei). Don’t you think Wilson Chronosonic driven by D’Agoustino Monoblocks will sound the same on my phone? Don’t you?

Please don’t waste our time with comments like this ... PLEASE

I recently sold locally a Pass ACA amp I had purchased 2nd hand. With my listening habits being what they are, it did not adequately power my Lascalas.