2. cables
  3. 156742-1458

Duelund conversion to DIY Helix Geometry Cabling

I have been an avid user of the Duelund cabling for over two years now and have used them exclusively in my system with great results. I have built many for friends and have used a full loom of interconnects, speaker cables, power cords and an extensive wiring modification for a previously owned balanced power conditioner utilizing Duelund 600V PolyCast wiring which was transformative. My cabling desires can be a little addictive as I have owned and evaluated 40+ brands of cabling costing more than an entire stereo system!

Over the past six months I stumbled upon a thread here on Audiogon in regards to a Helix designed cabling and as you probably already know, I just had to look a little deeper into this cable design…After a month of studying and sourcing parts, I decided to reach out to the designer/architect, Williewonka who gave more insights and philosophy on how the cable came into existence.

That conversation got the ball rolling in converting one of my KLE Duelund interconnects to Steve’s Helix designed which only entailed replacing the neutral with a Mil-Spec 16 AWG silver-plated copper wire with the neural wire being 3 times longer than the signal wire and of course the “Coiling” of the neutral wire : )

After the modification was complete, I was not sure what to expect from the Helix cabling but I was quite shocked with the results with “ZERO” burn-in time…The sound stage became much wider/deeper with a much tighter/focused image and clarity/transparency is like nothing I have ever heard in any cabling regardless of cost. In fact, I just sold a full loom of a commercially designed Helix Cable that’s renowned around the world and has more direct sale than any cable manufacturer; these $200 DIY Helix Cables walked all over them…

I believe you will hear the same results as I have and have heard back from friends who have already modified their Duelunds with the same results; WOW! Remember the cables will need 200+ hours to burn-in and settle into your system. My system is now 90% DIY Helix to include IC, SC, PC and Coax with each cabling adding its beauty of an organic and natural presentation that draws you into the fabric of the music.

You can tailor the sound of your cables using Duelund, Mundorf silver/1% gold, the outstanding Vh Audio OCC Solid Copper or Silver with Airlok Insulation or your favorite wiring and you can change it at any time…

 

http://www.image99.net/blog/files/category-diy-cables.html

https://forum.audiogon.com/discussions/difference-in-sound-between-copper-and-silver-digital-cables

https://forum.audiogon.com/discussions/adding-shielding-to-existing-cables

 

Enjoy,

Wig


128x128wig
mawe
34 posts
 
BTW,
this „skin effect“ together with the insulation material is responsible for high frequency performance of the cables.

PVC coated conductors sound more „muffled“ since PVC has a high dielectrics and „ restricts“ or „ interacts“ with the electron flow on the surface of the conductor.
This gets better with insulation material which has a lower dielectrics constancy like PE, even better PTFE, more better foamed PTFE, cotton and best is an „air gap“, slimmer wire in bigger PTFE tube.

This is being discussed here now for some time and people having positive results.
Especially when using thicker wire it is even more important to reduce the effect of the insulation dampening effect on the outer surface of the conductor.

In one of my first posts here I brought this idea up to use a PTFE tube.
grannyring's avatar
grannyring
6,441 posts
 
Multiple 18 gauge simply does not sound as good in power cords as we have been there and done that. Not in the Helix design. Not even close in our listening tests. Same is true with ICs and speaker cables using the Helix design. Multiple 22 gauge does not sound as good as two 18 gauge. Been there, done that with my own line of cables and now the Helix. In my own Duelund line 16 gauge sounded better than 20 gauge for ICs. 12 gauge sounded better than 16 gauge for speaker cables.

With the Helix design the same holds true. Just because others do something different does not make it right or sound better in this design. The proof is not just found in white papers or books, but also through the time consuming and laborious process of building and carefully listening over time. We have done that and put the hours of hard work into this process.

No shortcuts here, just real man hours, hard work, careful listening over break in time, money and a big dose intentional curiosity.
walkern
10 posts
 
I've replaced all my AC cords and ICs with Helix designs and am very happy with the results.  Now it's time for speaker cables, and I am very interested in trying the "Air" version.  If I'm using bare 14 gauge OCC copper in a teflon tube (for the 'hot' lead) do I still need to use the beads?  Seems like if the bare OCC wire is spaced away from the neutral / ground wire by the tube then the beads would be superfluous? Anyone tried this without the beads?
williewonka
3,072 posts
 
@walkern - I have tried the speaker cables without beads, but I prefer them with beads - the sound is just a little more relaxed, with slightly improved clarity and with a slightly larger image - it was NOT a huge difference

But that is with MY ears on MY system. And it was a couple of iterations ago, so I was not not using the bare wire in Teflon tube - it was using the 2 x 18 VH Audio with Airlok insulation

I guess the thing to do would be to try it without the beads and see if you like the sound.

Let us know how they turn out

Regards - Steve

williewonka
3,072 posts
 
@divertiti - WRT UP-OCC bare wire - from  my post  dated  02-14-2021 8:05am

https://www.partsconnexion.com/product50050.html

Regards


More to discover