Suspended cables

1969 we put man on the moon

Yes and all the cables on the Apolo 11 were on risers also🤦‍♂️🤷‍♂️🤦‍♀️🤷‍♀️

Oddly enough, I'm testing the Mundorf AMT 25CS2.1-R tweeter as we speak. My listening room/testing area is in the basement. Concrete floor covered with hardwood and than an area rug.

This morning I tested the tweeter with; microphone cable on the floor (snaked), cable on the floor (coiled), and finally elevated. I haven't looked at the results, I had to go to work.

Tomorrow morning I will post my measurements at www.diyaudio.com  'multiway', Mundorf AMT ..... 

On behalf of the newbie, note the date of his inquiry perhaps a little acknowledgement and dialogue respectfully wouldn't be out of hand. As for those with little interest, stop at the header text... Scan and read selectively. Move on, go away.

Cheers

The audio system of most people, unbeknownst to them, are too noisy to conduct subtle listening experiments most of the times, and they are not trained by the experimental exercise that is implicated in the 4 embeddings processes...


Changing a piece of gear in an upgrade does not count as an experience in listening, because the perception of changes is too biased by the purchase and sometimes too big and cannot be compared to another small past increasing changes like in various continuous experiments with the same pieces of audio system....

I learned that only correcting and controlling the 4 modalities of embeddings of an audio system make us able to discern what does what in an audio system...Upgrading a piece without knowing its real peak potential sound quality is foolish, and if we want to work with a piece of gear at his top potential we must correct and controls the 4 modalities of the piece’s embeddings...

Then lifting cables will not makes a difference for most people most of the times, because their audio system is not even prepared , and they are not trained themselves with a rightly prepared audio system able to make them self trained listener in their own audio history...

By the way I know that cable location and position makes a difference....And for the OP question, I myself will let them loose in this delicate arc by themselves because of their short lenghts ....If they were of a longer length I will be inspired to look for something like in  millercarbon virtual system photos....