Worthy upgrade?

I learned the hard way that amp and speaker synergy is pretty much everything. Sources are much easier really.

Yup, amp, speakers and the room are 90% of a system’s sound quality. That and how the speakers are placed in the room.

The following is seen in another thread, as a Post from myself.

I moved on from Cables Only, to Signal Wire Type many years ago.

I then found away to experience Wires used in Cables that are extremely expensive.

The following is showing a Speaker Cable using PC Triple C Wire, which is for myself as a Wire Type proven to be a substantial improvement to an End Sound when this wire is used in a Signal Path.

A prudent watch on the Market will find 30'ft for half the cost of what is shown in the advert.

This is not the only PC Triple C Speaker Cable option. 

https://www.fromjapan.co.jp/japan/en/special/order/confirm/audio9:10004923/2_1/#

 Report this

Yes, a speaker cable upgrade would be crazy. If you already have a coat hanger or at least plain old 12-14AWG OFC, there is nothing you can buy on God's green Earth that will sound ANY different, at all. That's both an objective and subjective fact if there ever was one. Anyone here telling you different is not an audiophile and knows nothing about physics and science of sound. That, or they work for one of these snake oil cable companies that straight up lie to consumers about their product. Just OFC with no bells or whistles, that's the cream of the crop.

@squared80 stated " Anyone here telling you different is not an audiophile and knows nothing about physics and science of sound. " 

With my recommendation of a Wire Type that does not align with the recommendation from square80 for a wire type, I am obviously in the assessment of square80 fitting the description made above by the person.

I am certainly not the latter suggestion, being a Shill plant acting on behalf of Furukawa or any of the their customer base that selects their wire types for Cables Designs which are being produced.

Each to their own, mine being OCC Wire used as a wire in a Signal Path, superseded OFC Wire as the Signal Path Wire in my system over 10 years ago, probably near 15 years the exchanges commenced.

Approx’ 5 Years ago PC Triple C Wire used as the Signal Path Wire has been superseding OCC wire and also D.U.C.C Wire has been used in conjunction to replace OCC Wire as the Signal Path at certain interfaces.

Mitsubishi has an even higher purity wire recently produced than their D.U.C.C Wire, which I will one day have a try off.

What is for sure is that OFC Wire used in a Signal Path is a distant memory. 

Being an non savvy physicist - non savvy Acoustician, leaves myself in desperate need of help when dealing with how electricity is transferred through my system.

It does seem others should run for cover when I put a suggestion forward that I am of the notion is worthwhile investigating, I remain unapologetic for offering a suggestion.   

 Being a non Audiophile, well that a first, especially when sticking close to the origins of the words meaning, being:

The origin of the term “Audiophile” is Greek from “audio,” meaning sound, and “Philos” meaning lover. Technically, the translation would be “sound lover”. 

What has that got to with a design for a structure of a wire that is creating a wire that typically less than 0.001% oxygen.

Also Ironic that square80 - AKA Mr I know Everything About Wire Structures, Strangers Knowledge Levels and Strangers Motives, is to strongly suggests a specific design for a structure for a wire, but refers to any other choice made by a individual as being the execrable choice, well that is quite amusing