Tube preamp for Pass Labs amp

Atmasphere, I know some pres have the the prerequisites, but it seems as though there are a lot more tube single ended pres with high output impedance's than ss ones. The Pass amps are particularly low input impedance, and the design seems to be particularly built around maximizing the use of balanced inputs.

Unsound, almost any tube preamp manufacturer has to contend with transistor power amps that have a lower input impedance. Even the old Dyan Pas 3X was an example of that- the X designated that it was set up to work with amps with an input impedance of 10K ohms.

And of course these days there are tube preamps with balanced outputs too. The one we make has been in production longer than any other - and it has direct-coupled outputs so the 10K input impedance of transistor preamp is no worries at all.

Audiofeil, I'll bow to your experience, but the Pass amps appear to be less than ideal candidates for many tube pres, when one considers the the low input impedance and the preference for balanced inputs. Both of which would seem to disqualify many more tube than ss candidates. Perhaps you'd like to share more with us?

Atma Sphere MP1 works great with my Pass xa60.5's - Mvaudio -

The Atma Sphere MP1 is my dream since long time .. and I guess it's superior to the Lector ZOE .. Mvaudio
But Aronsss wrote under 3000 $USD and I don't think you can find an MP1 for less than 3000 $.

I'm happy to read Icorem uses the Lector ZOE on his Pass Labs 250 .. I'm using the ZOE on my Parasound Halos JC1's and it just replaced the Pass Labs X1.
But to replace the good quality of the X1 I needed to add the 6H30-DR to the ZOE.
So I suggest Icorem to try these fantastic tubes on the already super good Lector ZOE to get the nirvana with few dollars.
Just put not less than 250 hours on them!

My Cent!

i'll second Lector zoe which pairs marvelously with my Pass 250 (and my Lector cdp 7)

Atma Sphere MP1 works great with my Pass xa60.5's. Balanced connections and a very good phono stge for medium output and up cartridges.
Mark

Shindo Auriges

Audiofeil is absolutely right.
I suggest Aronsss to listen and better try on his setup the Lector ZOE .. kinda Italian tube preamp very and very good .. with huge possibility of tube swapping to get the latest flavour

>>02-08-11: Dob
most tube preamps will have poor match with them.<<

Totally erroneous.

Ignore this guy. Email Pass Labs or me for the truth.

Dealer disclaimr.

I'll echo the other two posts for the Calypso. I'm using one now with my XA-30.5 with great results.

You got to be very careful. Input impedance of most Pass Lab amps is realtively low so most tube preamps will have poor match with them.

I can recommend therefore Joule-Electra LA-150 Mk2 used (but latest generation) or new or demo, call them. This preamp has two outputs: one with realtively high impedance and another with relatively low impedance so you can match it with all power amps.

SAS Audio Labs 11A $2849-New, Great Preamp!

You could post your question here:

http://www.diyaudio.com/forums/pass-labs/

I have loved the hybrid tube kW linestage from Musical Fidelity with the Pass and FirstWatt gear I have paired it with. Check out the great Michael Fremer review in Stereophile. There are other nice reviews of this around the web too.

I agree with Pdreher. I use the Calypso with NOS tubes also, with my Pass Lab XA 30.5, works very well. I'm sure there are many preamps what would also work very well.

Aesthetix Calypso with NOS tubes. There's one listed for $2,500. I had one for approx. 3 years and regret selling it.

My Modwright 36.5 pre with my Pass X150.5 sounds great to me !

I am runnning a Modwright SWLP 9.0se into a Pass X-250 into Totem Forests, they gel gloriously.