The Center, Measured

A concentric driver can do very good in a center channel application, depending on the design.. The woofers in the coupled cavity design of my speaker crossover at 200 hz into the mid/tweet concentric, which handles the rest. (Elac Adante AC61 from Andrew Jones).

The woofers are inside coupled to external radiators, the latter also serving as an acoustic filter...i.e., you'll also hear some of the cleanest bass that may/may not otherwise only happen with very expensive drivers.

I struggled for years to find a design that nullifies the typical problems of center channel speakers. The guy literally gave away TAD type of performance at a fraction of the cost.

No. We sit in the near field with an old friend, a Kuro plasma display. 

@terry9  Nice idea.  Did you use room correction?

I turned a Quad 2905 ESL on its side - utmost clarity. Seamless with an otherwise all-magnepan HT system.

Thanks, @audiokinesis - I think the foundation for this is that 4" midrange. Gravesen’s center channel designs get excellent off axis performance as well.

The center speaker format for homes (vs. theaters) really is a challenge. Consider in a theater the three speakers behind the screen are identical. The purpose of the center, as you point out correctly, is to center dialogue and effects no matter where in the listening field a person sits, which would be well served by a vertical 3-way speaker or large coaxial.

The physical challenge for homes is height. My own center is 12" tall, which while small compared to mega-centers like the Wilsons, is very tall for many home entertainment centers. The compromise is usually to create a 2-way center.

Less common alternatives are 3-way’s with tiny mids and/or tweeters, and coaxials.

If I were forced to downgrade this center and reduce the height to say 8" tall I’d probably change everything except the midrange which is the key to the off-axis response. I’d use a "low profile" tweeter with much smaller diameter body, and 5" mid-woofers. This would reduce dynamic range and bass, also small diameter tweeters tend to be less smooth sounding, perhaps small prices to pay for greater livability. :)

Not that I’ve looked at every set of off-axis measurements done on a center-channel speaker, but I’ve seldom seen off-axis response that good on a conventional speaker, let alone a center-channel speaker!

(For anyone wondering what I’m talking about, the horizontal format of a center-channel speaker typically results in poor horizontal off-axis performance... when the listeners/viewers who are MOST IN NEED of good output from the center channel are those sitting well off to either side of the centerline.)

@audiokinesis  Why thank you kindly good sir.  Honestly it's better than I expected.  That tweeter's natural off-axis performance is pretty outstanding.

Imo that is SUPERB off-axis performance for a center channel speaker.  Bravo!