I have a 3-year old Pro-Ject Debut Carbon (which has an Ortofon 2M Red cartridge) and a set of Tannoy Revolution R3 floor standing speakers (6-Ohm, 89dB). Currently, I am using a cheap Behringer phono amp and a Sonos Connect:Amp. I wish to upgrade to an analogue integrated amp so that I have an analogue signal path. I listen to a variety of different types of music and the room has a vaulted ceiling and has glass at either end. I do not need high volumes for extended periods of time. My budget is under $1,000 including a phono stage. Finally, I’m partial to a British manufacturer to “keep it in the family” so to speak (though I realize that only my speakers are British :) )
I’m leaning towards the Rega Brio (2017 version). I’ve considered the Creek Evolution 50A, but this will break my budget especially when I add a phono amp, unless I can find a used example.
The current Rega Brio has been very well received. I've read lots of good things about it and never any negative press that I've seen. I own the Rega Elicit-R which is a couple of steps up the Rega family ladder. It is outstanding IMHO. If the Brio shares the same house sound, its a winner.
Just a word of caution - take a look at the Amazon reviews of the Rega Brio. There are several comments about hum/buzz issues. There's also a recent post here about the same thing. The previous version, the Brio-R, also seemed to have some noise issues. It may or may not be a problem in your setup, but it's something to keep in mind.
There are only 6 reviews, but four have significant complaints. Three complain of hum issues and one had a noisy volume control. I'd make sure that you buy it from a place that has a liberal return policy just to be safe. No one complains about the sound quality, though. It's certainly getting great reviews on that basis.
By the way, I have heard the Arcam A19 and thought it was a very refined sound for its price. You might also look at Marantz and Yamaha in the $1000 and under range for integrated amps with a phono stage. I know they're not British, but they have their adherents.
Thanks smrex13. Yes the reviews are disturbing. Perhaps a case of “if you get a good one it’s great, if not...”
Samac - thanks for th Arcam suggestion. I did not realize that the Arcam A19 has been discontinued. It still shows on their website and retailers are pricing it at $995.
Any thoughts on the Creek 50A? I’d need to add a Phono amp or their module but I’ve found a mint used one for around $550.
I read that on WHAT HI-FI and various forums around the first of this year. The fact they are still available and on their website may mean they are still in production. I hope so.
Wish I could help you with the Creek but I have never had the opportunity to hear one.
I haven’t heard the Creek Evo 50, but it’s big brother, the 100a, powers my bedroom system and I love it. Totally different amp technology (the 100 uses class G), but as much as I enjoy my Creek, I think you should try to give one a listen if you’re considering it an option. For $550, I’d expect it would be very tough to beat.
Their modules make them extremely flexible and you’re not paying for the expensive power supplies and housings of stand-alone units. The modules have been well regarded in reviews. If you are getting a used Evo50 for $550, you can add a new phono module for $250 and still have $200 left over for vinyl. Sounds like a win to me.
I'm leaning back towards the Brio. Found a local source at a decent price, so I can easily get support if needed. I really like the look of the Creek but the used one I was looking at is in Canada, not the US and I have learned that they are made in China. I would really like to buy a designed in the UK, built in the UK unit, which leaves Rega in my price range. There's no particularly good reason for this desire but oh well...
I don't think you can go wrong with the Brio. Just wanted to offer my experience with a product from the other manufacturer you were considering since I've had such a positive experience. I agree with smrex13 that you should post your impressions once you get things set up regardless of what you pick. Best of luck and happy listening.
Yes I will definitely post an update and I really appreciate the insights that you’ve all provided, especially to a new member of this forum. It might take me a little while - have to actually make the purchase, arrange everything and head to CES as well... I’ll try to restrain myself whilst there :)
So, curiosity got the best of me, and I ordered a Brio. I have had it for a couple of days, and I have to say I'm very impressed. It's got an engaging sound that really doesn't do anything wrong. Perhaps the best thing that I can say about it is that I started pulling out records and CDs that I hadn't listened to in a long time because I was enjoying the music so much.
I have it paired with some speakers that are also breaking in, so there will probably be some subtle changes, but definitely a thumbs up from me at this point!
@smrex13 - congratulations on the new Rega Brio and speakers. I have not heard the new Brio myself, but people I trust have told me it is a very enjoyable unit. I have the Rega Elicit-R integrated amp and the Rega Saturn-R CD Player/Transport/DC and I find them to be very good products. I've owned more expensive separates and more a couple of other similarly priced integrated amps and CD players and I've found that I prefer the Rega Sound. Driving my vintage Infinity RS 1.5 speakers, I don't think I've ever enjoyed music listening more than I do through this setup.
Enjoy your new setup and reply back to the thread in a couple of weeks once your feel break-in is complete.
@reubent - Thanks. I've wondered how the Elicit-R and Elex-R sound. A couple of reviews called them 'bright' and suggested pairing them carefully with speakers. However, another review suggested the Elicit-R was warm. My guess is they are transparent and the reviewers are hearing the rest of their system.
I'm actually auditioning the Brio along with two different sets of speakers - the Wharfedale Reva 2 and the B&W CM5 (used), so there are a lot of moving parts in the evaluation process. However, it's pretty clear that the Brio sounds great and drives either pair of speakers well. As you said - it's just enjoyable to listen to music through the Rega.
Will post my thoughts in a couple of weeks. Best, Scott
It's still sounding great - will give a more thorough review in a week or two. Just a couple of operational/functional notes that prospective buyers may want to be aware of:
1. The speaker terminals on the back of the amp are very difficult to get to, as they are close together and somewhat recessed. I don't think that spades would work. Bananas or bare wire are your best bet.
2. The ground lug for the turntable is on the underside of the unit, and it's a fair distance from the RCA jack for the phono input. If you have a phono cable with an captive ground wire, you may end up with a fair amount of tension on the phono cable/ground wire.
3. The power cord jack is right next to the speaker binding posts. My power cable (an Anti-Cable level 3) sits snugly against the binding posts. If my power cable's connector were any larger, I wouldn't be able to use it.
I guess these are the compromises that have to made to provide a small footprint amp like the Brio. Will follow up with listening impressions later.
I have a Rega DAC. It died just after the warranty expired. Paid $1000-plus to have it repaired/upgraded. Got a year warranty on the work. 15 months later, one channel died. It's now in storage.
I shall never set foot near a Rega anything again.
Just thought I'd update you all on my experience with the Rega Brio. I'm running it with Wharfedale Reva 2 speakers, a VPI Traveler turntable and a Marantz SA 8004 SACD player.
The Brio has been very impressive - it just pulls you in to the music. After a few days powered up it smoothed out quite a bit, and I have absolutely no complaints. The highs are very natural and non-fatiguing, which is something that is difficult to find at this price level. Midrange has nice weight to instruments. As my speakers are stand mounts, I can't say how it does really deep bass. However, the bass that I get from my speakers is very full without being boomy. The overall sound is very cohesive.
The phono stage is much like the amp itself - relaxed, musical, engaging. One thing I wasn't expecting was the quality of the headphone amp. I don't listen to headphones too much, but I might start. It's very dynamic and clear with my Sennheiser 600s.
For $1000 I can't think of anything that compares. You could have an awfully engaging all-Rega system with a RP3, Brio, and RX1 speakers for about 3k.
Anyway, I was reluctant to try it because of the complaints of hum issues, but mine is silent and makes great music.
The brio is a solid choice, Sounds like much more than 50w into 8 ohms. I went with the elex-r because I wanted the better phono stage and power. Another reason I went elex-r was the price. They were $1875 until a few months ago- now they are $1395! Once rega announced the release of a new version in July the prices dropped. The new model is $2799. That is out of my league. take care- and don't worry about a tiny bit of bad rega reviews, most are pure crap. They put everything into every product they build- really high standards and a mostly hand made assembly line. My whole system is now rega except for the powerline conditioner. I am very pleased.
I had a rega brio and dac combo for quite awhile. I really liked that little setup. Truth be told I kinda miss them sometimes. I eventually moved on for more powerful pastures but I kinda wish I still had them around to build a smaller second system around.
You must have a verified phone number and physical address in order to post in the Audiogon Forums. Please return to Audiogon.com and complete this step. If you have any questions please contact Support.