Quantum Science Audio light blue fuse; $71, what a bargain!


I wanted to start a new thread about the more affordable versions of these fuses. I don’t doubt that the higher end versions are amazing, but most of us aren’t very likely to be able to hear them for ourselves. Fortunately, pretty much anyone who is serious about building a musically enjoyable and engaging system can get a good taste of what they’re all about.


I’ve had the light blue QSA fuses ($71) in my CD transport and DAC for over two weeks, now. They replaced SR blue fuses, at around twice the price, and easily bettered them. I am expecting one more light blue tomorrow, to replace an SR orange in my amp. I’ll give an update on that, once I get it installed and listen.


Meanwhile, here are a couple quotes from my posts on the other thread:


“What I am hearing is; voices & instruments are more solid and lifelike, with increased natural detail and sense of space, better dynamics, and a more relaxed overall sound.”


“Just got in a second light blue fuse for my DAC. So far, more of the same improvements I got in my CD transport. Very nice!😃 One thing I appreciate is the break in seems to be pretty quick, without any of the nasties you get with some other stuff. Pop it in, and you’ll hear improvements in short order, at least that’s been my experience.”


I am continuing to greatly enjoy what these fuses bring to my system, and am really looking forward to getting the last one in my amp.


tommylion


Thought you’d see it, you can’t argue with Electronic Engineering Laws and the measurements they give, with only voodoo and snake oil hearsay.


Little thing called measurements and EE laws answers all if you know any of them.

As I said to those that are interested.
Just clean and tighten your fuse holder and re-new your fuse (if old) with a good quality 50cent Bussman, Littlefuse or similar, as with "many switch-on surges" they do deteriorate and get crusty as these pics show of a fuse ageing over time. https://ibb.co/9NbTwqK (even the $$$ boutique ones will age just as fast also)


Cheers George
@ Glory - 

Tell me more about the what the fuse did for the Sorcer as I have the x4 and really like it. I demo'd it for my teenage nephew and he heard the difference immediately and said, "plug it back in, please" - 

I am also considering a fuse for my SR SE active ground block which has a orange fuse in it...

Post removed 
I’ll be receiving a violet fuse early next week, putting it in my nagra psa amp.  Have used SR Orange in other gear (and like the change), but nothing in the nagra yet.
Have a yellow installed In my Add Powr X2 and it made a huge improvement.

demoing the red black in the 2X and have one hour in. 😱😲
I have a friend the has a Truth preamp to sell. Send me a message if interested.
@thecarpathian

no it was luke skywalker’s great great great grandma - amelia earhardt!!!

side note -- one thing that i learned in this thread, is if you have to... like you HAVE TO... JUST HAVE TO have the last word... each time, every time, all the time

that is how you get to 10,000 posts in a hurry on this goofy forum
But continuing to carry on about it negatively without even trying one is disingenuous
No quite the opposite, it gives the non technical the technical views from the non voodoo side of the fence also, so they can make an informed choice.

Cheers George 

 
And you were showing such promise.....

+1

George,
If you need to hate something in this life, I guess "boutique" fuses are an okay choice. But continuing to carry on about it negatively without even trying one is disingenuous at best. Do you think it would be right for someone to do that with one of your products?   
I decided to go and hear by myself. Bought a yellow for my preamp.


Should of just tried below first to save a bucket load of money

As I said to those that are interested.
Just clean and tighten your fuse holder and re-new your fuse (if old) with a good quality 50cent Bussman, Littlefuse or similar, as with "many switch-on surges" they do deteriorate and get crusty as these pics show of a fuse ageing over time. https://ibb.co/9NbTwqK (even the $$$ boutique ones will age just as fast also)


Cheers George


I decided to go and hear by myself. Bought a yellow for my preamp. I ordered after mail contact on their website. Delivery in 6 to 10 days here in Europe.
'life is too short to argue endlessly with strangers you couldn't care less about on internet' -- luke skywalker  
I'm sorry jjss49, but that is historically inaccurate. Although commonly attributed to Luke Skywalker, in-depth archival research at Washington's Air & Space Museum shows that it was in fact first uttered by Orville Wright, the night before he forever changed history by inventing his brother Wilbur.
I just have this thing about free range bullies. 
Someone's gotta stand up to them.

All the best,
Nonoise
man you guys are worse than angry chickens in a henhouse

'life is too short to argue endlessly with strangers you couldn't care less about on internet' -- luke skywalker  
Yeah, a recording that's all noise and no substance at all.
Admitting your faults is commendable and just one of many steps you need to take on the road to recovery.


I've never understood closed minding thinking (those that only reflect on the past - flat earthers?) - after all, exploration and discovery is what makes technology better and our lives...I have found tweaks to significantly enhance my listening pleasure...without understanding 100% why they actually work...

Any speculation on what QSA is doing with their fuses? Not that it really matters - as long as they sound great...but Graphene - perhaps? I mean SR, PPT and myriads of others are using it...there is certainly  something going on here - I can hear the improvement when applied properly. 

From a Science article...substance perhaps? 

One of the biggest finds is that, using Weyl fermions, the researchers will be able to create fast-moving electrons with no risk of backscattering, or loss of electrons in a collision. Backscattering makes electronics less efficient and creates heat. Weyl electrons are able to avoid collisions and eliminate backscattering.

Essentially, what this means is that the Weyl fermions could provide a better flow of electricity and assist in the creation of more powerful and efficient electronics, especially in computers. 

It's interesting as others have found purity of copper sounds better - and they have suggested that the improved lattice structure helps with flow...and sounds better...perhaps graphene. 

 I am auditioning some new "gear" / "Tweaks" right now. But when this trial has passed, I will move on to these fuses and outlets...




The fuse still heats.
bends and deteriorates with age.

As I said to those that are interested.
Just clean and tighten your fuse holder and re-new your fuse (if old) with a good quality 50cent Bussman, Littlefuse or similar, as with "many switch-on surges" they do deteriorate and get crusty as these pics show of a fuse ageing over time. https://ibb.co/9NbTwqK (even the $$$ boutique ones will age also)


Cheers George
Post removed 


Nothing wrong with using good reasonable priced contact cleaner.
Magnets are something else though, (voodoo comes to mind)

As I said to those that are interested.
Just clean and tighten your fuse holder and re-new your fuse (if old) with a good quality 50cent Bussman, Littlefuse or similar, as with "many switch-on surges" they do deteriorate and get crusty as these pics show of a fuse ageing over time. https://ibb.co/9NbTwqK (even the $$$ boutique ones will age also)


Cheers George
Georgie Boy, I use the 1260 contact enhancer from High Fidelity Cables  on all my connections including all my magnets..makes for more and better music. Hats off to better snake oil. Tom
I just ordered a yellow fuse. It will take a while to get here as Tweak Geek is out of inventory at the moment, so they are accumulating orders and will send them off to the mfg on the 15th.

Frank.

PS: Nonoise ... Please count me in on one that is not interested in what Georgie-pie has to say.
As I said to those that are interested.
That would mean no one on this thread. Right?

All the best,
Nonoise
As said no electronic engineering technical knowledge.

As I said to those that are interested.
Just clean and tighten your fuse holder and re-new your fuse (if old) with a good quality 50cent Bussman, Littlefuse or similar, as with "many switch-on surges" they do deteriorate and get crusty as these pics show of a fuse ageing over time. https://ibb.co/9NbTwqK (even the $$$ boutique ones will age also)


Cheers George
Love the way you just make things up. Shows a lack of maturity.
Any decently designed piece of gear will account for current in rush during "switch on". There has been progress since the ’50s.

Meanwhile, I’m continuing to enjoy listening to my gear with their HiFi Tuning Silver Star fuses, which have done journeyman service for the last 7 years.

You've proved nothing wrong with my statements. That, and no one on this thread cares what you think.

All the best,
Nonoise

Wrong, it’s the opposite, and shows lack of technical knowledge.
As fuses get their worst punishment at "switch on" that’s why they blow sometimes for no other reason than age.
It also shows the power supply is very large with good amount of "storage capacitance" to charge up, and that the amp could be very in class-A/B bias.
And last the amp could be tube which needs even more current at startup, because of the added heater factor surge at start up of tubes,
So proves that above statement totally wrong.
As I said to those that are interested.
Just clean and tighten your fuse holder and re-new your fuse (if old) with a good quality 50cent Bussman, Littlefuse or similar, as with "many switch-on surges" they do deteriorate and get crusty as these pics show of a fuse ageing over time. https://ibb.co/9NbTwqK (even the $$$ boutique ones will age also)


Cheers George
A badly designed amp would do that to a fuse, that's for sure. Never had it happen to anything I've owned. Same fuses, since, forever.

All the best,
Nonoise

Just clean and tighten your fuse holder and re-new your fuse (if old) with a good quality 50cent Bussman, Littlefuse or similar, as with "many switch-on surges" they do deteriorate and get crusty as these pics show of a fuse ageing over time. https://ibb.co/9NbTwqK (even the $$$ boutique ones will age also)

Cheers George
I was about to pull the trigger yesterday on an Orange SR fuse. I bought my Innuos Zenith from Mike at Tweek Geek so I will call him today and get a couple blue ones for my Zenith and PrimaLuna EVO 400. 
Post removed 
Anyone here personally tried any of QSA outlets? I would be specifically interested in anyone who has compared it to SR orange outlets. BTW, I have also purchased from TweekGeek and found him to be very informative and responsive. Will have to try the fuses and outlets soon...and report back.  
Post removed 
Post removed 
Post removed 
Post removed 
Post removed 

Never tried boutique fuses, or different directions on any cable or fuse

Don’t even entertain the thought, it’s a snake oil con, aimed at the electronically gullible

They have to be akin to a diode to be directional, but it’s a piece of wire.
Same goes for cable, and if they do act like a diode then that’s bad news.

Just clean and tighten your fuse holder and re-new your fuse (if old) with a good quality 50cent Bussman, Littlefuse or similar, as with "many switch-on surges" they do deteriorate and get crusty as these pics show of a fuse ageing over time. https://ibb.co/9NbTwqK (and even the $$$ boutique ones will also)

Cheers George
As far as the duplexes, I believe there is a review forthcoming from Clement Perry at stereotimes. I suspect it will be of the higher end ones, though. Might not be real helpful if you are looking at the lower end ones.

Obviously he is selling them, but Michael at Tweek Geek seems to be a straight up kind of guy, who is not just in it for the money. I think he could be helpful in getting an idea of what to expect from the duplexes.

Like I said before, you can’t, the mains is AC (Alternating Current), it changes direction 60 x a second) so it’s impossible to put the fuse in the wrong way!

Yes, but doesn't the electromagnetic wave travel in one direction from source to load?
Competition, allowed by the free market is a fantastic thing. Let's see who goes back to the drawing board. :-)
Absolutely!
A win/win every time.
tommylion

Keep writing on the subject of aftermarket Fuse(s). I am enjoying reading your thread. Does QSA cite the life-span of their products?

Happy Listening!
Before I swap out all of my SR orange Fuses and Duplex boxes

Absolutely https://youtu.be/YTY26k0CA0I?t=4


I do see that the fuses show which direction they should go so that is good.
Like I said before, you can’t, the mains is AC (Alternating Current), it changes direction 60 x a second) so it’s impossible to put the fuse in the wrong way!🤦‍♂️🤦‍♂️🤦‍♂️