New lease on life for a pair of Ohm F's

Contact Bill at Millersound 215-412-7700. Bill is the only person I would trust with driver repairs. If you cannot afford to do it now wait until you can do it right. Nothing beats a speaker without a crossover.

ZAvato,

I used to work at Tech HiFI and recall the EPI 100s quite well.

THey were pretty decent for the day but nothing to compare to Fs or most well designed modern day speakers
, including modern OHMs.

That is very cool. The Ohm F is a great speaker. Spend the money to restore it correctly. You need a very powerful amplifier for this speaker.

One more,
Dale Harder
HHR exotic speakers
http://www.hhr-exoticspeakers.com/

Tech Hifi- where I heard the F's, where the EPI's came from, and I even remember their house brand, Studio Design.

Well, the options are out there.

1) rebuild what you have if you can find someone to do it right for a price you can afford

2) Dale Harder rebuild or new drivers

3) OHM upgrade

If it were me, I would not dismiss the OHM upgrade option until I did an in home audition. You could have brand new well supported speakers that have more in common with the old Fs than not + are competitive with modern SOTA speaker lines, yet still totally unique.

BTW OHM was a Tech Hifi house brand. John Strohbeen, the current owner and main technical guru at OHM, used to own Tech Hifi.

I always preferred all the old OHMs sold at THF, including the conventional box designs like the L and H in particular over most other brands sold, including EPI, though EPI was probably a strong second in the pack with a few others.

My main speakers these days are a pair of OHM f5 series 3 which are recent generation OHM Walsh CLS drivers mounted on refurbed OHM F cabinets that I picked up for a fraction of retail price from OHM a few years back taking advantage of sale price for refurbed units + full trade in value for older OHMs.

I also run a smaller pair of OHM 100 series 3 drivers mounted on refurbed Walsh 2 cabinets, a pair of Dynaudio Contour 1.3mkII monitors, and a pair of small TRiangle Titus XS monitors. I also still run a refurbished pair of OHM Ls, my original first good speakers from TEch Hifi years ago that I upgraded myself with drivers and parts from OHM and elsewhere, and a really small pair of Realistic Minimus 7 speakers out on my deck during warm weather months.

Zavato - Just as a point of interest, while the current Ohms are not full-range omnis, they can be ordered configured for something close. The directional tweeter rolls in above ~7kHz, so in this respect, the current Ohm Walsh line is not fully omnidirectional. But the attenuation to the rear of the cans is accomplished with a physical damper. IIRC, John can provide drivers without this damping by special order, meaning they would be true omnis up to around 7kHz.

I will second the repair from Millersound as well.
I also had a pair of these and will agree that a high quality solid state amp will drive these speakers extremely well.