2. misc-audio
  3. 193876-174083

Need advice from the gurus.

This is my favorite HIFI hang out and I'm at a bit of a crossroads and really could use some advice.  I'm a bit scattered and I could use some help figuring out what direction to go in.  Here's my current equipment:

==Electronics==
Gato Audio AMP-150 AE (integrated amp)
Topping E70 Velvet DAC
iFi Zen Stream (I use Tidal)
Cherry Maraschino monos (not using at the moment, I don't have a preamp)

==Speakers==
Magnepan LRS+
Kef R3
Monitor Audio GS20 (vintage speakers from my father)
Omega Super 3 High Output Wide Baffle XRS towers

Lately I've been running the LRS+ with the Gato integrated and Topping Velvet / iFi stream combo.  I like it but I don't know if I'm missing out.  What would you do if you had my equipment and wanted to simplify?  On my hifi setup I listen to mostly mellow stuff, lots of female vocals, classic rock, ambient stuff.  I really like female vocals and midrange with a lot of texture if that makes any sense.  What would you do different if anything?  Thanks!
 

tubeguy76
deep_333
1,743 posts
 

@jasonbourne71 

Scroll over to @ 12:00 for the measurements. What was your "eye-opener" exactly?

https://www.youtube.com/watch?v=PQemV-W48b8&t=890s

Go to ASR and read the test report on the LRS+ speakers. It is an eye-opener!

jl35
4,136 posts
 

I was told by the manufacturer it was not a balanced design ... maybe the representative was mistaken...

jeffbij
122 posts
 

+1 @cleeds   -  Agreed it looks like a balanced connection, but it may not be a fully balanced design with the XLR jacks a convenience. Either way, I would think it would be worth giving it a try.  Couldn't hurt and might be eye opening with those monoblocks. 

cleeds
6,067 posts
 
jeffbij

it may not be a fully balanced design with the XLR jacks a convenience.

Either the amplifier is balanced or the published specs are wrong:

Input impedance    20kΩ RCA or 40kΩ Balanced
Preamplifier output impedance 100 Ω RCA and 200 Ω Balanced

tubeguy76 OP
169 posts
 

@deep_333 Lrs+ without a good servo subwoofer would be an incomplete speaker and it needs a sub’s help all the way up to around 200 hz. A pair of rythmik Fm8 subs set up on the front stage, integrated correctly should do the job.

I have a Martin Logan Dynamo 800x sub but it’s not a servo sub.  It stilldoes a decent job but I haven’t heard a servo sub to compare it to.

As far as selling my speakers... I can do that.  I need the space anyway.  I've been looking at the Mofi speakers since they came out... they look like something I would enjoy.


 

More to discover