Magnum Dynalab Magic eye


Hello,
The magic eye on my Dynalab MD 108 no longer works. I have dismantled it but there is no reference on the tube.
My question: do any of you know the reference of the tube used?
Thank you in advance for your help.wink

regards from Belgium

denisio

Thanks for your replay,

The tuner works perfectly only the magic eye does not light up the tube is probably out.

What I'm hoping to find is the exact type of magic eye used, not the MD reference.for example: EM11 or EFM11,....If I have the exact reference of the tube, I could then check the voltage first to see if the tube supply is correct.
if the power supply is OK, then the tube is broken
if the power supply is not correct, then the tube is OK and the problem is with the power supply

I use a ST-2 antenna and the sound from this tuner is superb!

I send a mail to the Belgian representative of MD I'm waiting their replay

regards

Best FM Tuners, FM Antennas, Music Streamers, Integrated Amplifiers, Internet Tuners (magnumdynalab.com)

Click on the PDF link on 
 

Magnum Dynalab – new ownership

April 2023 – Colquhoun Audio Labs is pleased to announce that we will be carrying the torch forward for this iconic Canadian company. All manufacturing, sales and service will now be part of our Canadian operation in Peterborough and Dwight Ontario. Colquhoun Audio is currently the owner operators of both Bryston Ltd. and Axiom Audio.

BTW - I also have this tuner and it is superb.

Any 6922 or 6DJ8!

PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION No sound, meter lights are not on • Power cord disconnected • Power off at source • Fuse blown • Connect power cord • Check AC source • Check fuse No sound, meter lights are on • Interconnect not properly installed • Preamp set to wrong source • Bandwidth switch not activated • Power amp off • Tube failure • Check installation of interconnects • Turn preamp to tuner • Activate one of the bandwidth switches • Turn on amp • Replace tubes (MD Reference 6922) Signal strength is low • Antenna not connected • Wrong type of antenna • Station too far away • Antenna pointed the wrong way • Check antenna hookup • Check instruction manual for types of antennas • Change your antenna • Rotate the antenna to point at the station Reception is poor • Antenna not connected • Wrong type of antenna • Cross talk from neighboring stations • Multi-path is occurring • Antenna switch on wrong setting • Check antenna hookup • Check instruction manual • Switch to narrow setting on IF bandwidth • Rotate your antenna, read the Reception Techniques • Check antenna input setting Intermittent sound • Mute switch is on • Turn mute switch off