2. amps-preamps
  3. 123569-7863

Looking for NEW amp...would a Bryston 3Bsst output more power than a Krell 400xi amp?

I have a pair of Martin Logan Advange speakers and I am looking for something that will offer plenty of power! The krell 400xi is rated at 200 watts and the Bryston 3bsst is rated at 150 watts, but has a dual channel design. That being said, would the Bryston amp offer more current and power to the logans?

PS. Is there a huge difference in sound between the Bryston 3Bsst and 4Bsst?

thank you, any info is greatly appreciated.

Matt

matt00
18 responses Add your response
dweller's avatar
dweller
3,786 posts
 
FYI: Bryston has an all-new lineup of amps (see current TAS magazine).
xti16
1,525 posts
 
PS. Is there a huge difference in sound between the Bryston 3Bsst and 4Bsst?
I believe the 4Bsst would have double the power of the 3Bsst (150 vs 300W). You will notice a hair more ’control’ in the music with the 4Bsst. But nothing earth shattering. But when pushed to the max the 4Bsst will be better. Again not earth shattering IMO - just a bit louder.

Best would be to demo them yourself.
retrofunk
15 posts
 
May I suggest the Spectron musician III mk 2.... Top of the line class D... Oodles of power...I replaced my Cary v12 R with one...couldn't be happier.
rwheeler
4 posts
 
I've owned a 3B-ST, a 4B-ST and a 4B-SST at one time or another.  I believe the 3B-SST is actually rated at 200/ch. Also have owned a BP25A pre, BP26 pre and a BCD1.  At one time or another I have wished I had each them back. Currently using the BP26 and 4B-SST.  Love them.  Warranty and service are awesome.
herndonb
124 posts
 
Don't rule out the awesome Krell Vanguard.  It's the best sounding integrated Krell has made.  200 Wpch 8 ohms also...
dave_b's avatar
dave_b
3,159 posts
 
The Krell Vanguard does everything better than even my former Evo 402 amp with 202 preamp.  It plays like separates but goes even further toward musical realism.  An amazing amp for those who love music over flash.
jafant's avatar
jafant
19,730 posts
 
Unless Krell has moved production back into the USA, I would go w/ Bryston.
herndonb
124 posts
 
All Krell is made in Connecticut now.
jafant's avatar
jafant
19,730 posts
 
TY-herndonb

I know some of the previous models were made, in part, in china.
herndonb
124 posts
 
The S-300i, S-550i, and S-350a/S-350av were built there, but are all discontinued now.  Krell is designed and built in the USA.  The aforementioned integrated amps and disc players sounded excellent just as Krell products do, despite them not being built here.  However, the current Vanguard integrated and Cipher disc player are even better sounding, albeit at additional cost. 
jafant's avatar
jafant
19,730 posts
 
I am certainly interested again, in Krell, now that I learned the products
are built back "home".
herndonb
124 posts
 
All Krell is built in the USA now.

jafant's avatar
jafant
19,730 posts
 
TY- herndonb
matias1979
44 posts
 
Krell Vanguard. Better than many systems pre-power
arcticdeth's avatar
arcticdeth
1,572 posts
 
Bryston.

 
dave_b's avatar
dave_b
3,159 posts
 
Krell...this thread is from 2016 :()
extravaganza
373 posts
 
yes,but people in many cases searching some info abaut these or similar amps:) I would recommend check out  krell kav500i or s550i power horses for affordable used prices.Very rare to find.But they can drive big speakers ,difficult loads and control them without clipping
erik_squires
16,121 posts
 
Power is not the issue with ESl's so much as impedance.

Look at the frequency response with a simulated speaker load. The Bryston here is the clear winner.

Not sure about pricing but you should consider the Sander's Magtech amps as well.

Best,

E
Log in to respond
More to discover
80x80
Atma-Sphere MP-1
80x80
BAT VK80t
80x80
Audio Research Reference 6