I’m considering upgrading my speakers internal wiring

When Peter lived / worked here in Alpine, he was a guy you could have a beer ( the last time i recall w him… he had a hard Cider… )… i would just call him… Unconstrained by $ his answers will likely change..

Also, the last pair of PbN speakers i heard did have a plexiglass back exposed filter network with absolutely nothing to be ashamed of… just my opinion…

@wolf_garcia I have ( somewhere ) 50’ of brown lamp cord circa 1965… copper was great again back then… Mac and Bozak endorsed..

Greek is all Greek to me, i specialize in Latin, in particular the prayers for cooperative electrons… likely a Greek thing.. after all

I replaced the internal wiring first before I upgraded the crossovers , this allowed me to experience the change only of the wires .  I used Cardas chassis wire , first I used 15.5awg from speaker posts to crossovers and then to the speakers , I then changed to 17.5awg from the mid and tweeter crossover to the speakers . The origianl wiring was 18awg solid wire .  I like the sound improvement alot but working with cardas wires means using a solder hot pot which is a little more work . 

If your crossovers have Clarity capacitors that's great , I used the newest Purity series on the mid and tweeter and CMR , MR on the woofer ( I upgraded the woofer first before the Purity caps were available ) .  You should also consider replacing the resistors with Mills , I had done this after the wiring and before the capacitors ( I tried to listen to each form of improvement independently rather than doing the upgrades all at once ) . I used the original inductors  do to size .  I also installed Cardas speaker binding posts although if you have the funds WBT posts might be better .

Good Luck

@bobbyloans 

Quality of internal and external wiring is meaningful in all of the components in our system.  I would say the odds are very good that you would find internal wiring for your speakers that would make a noticeable improvement,  

However your system is likely already tuned to your liking and introducing another variable in hopes of improved sound is not a sure thing.  

Since bulk cabling is relatively inexpensive I would suggest you buy at least (3) different brand specs of wiring and give each one a trial.  

Once you find the one you prefer, I would even solder the wire directly to all terminals.  

Lots of work but how would you feel if the first set didn't work out? 

Well this has been a fun ride my friends!

who knew a some

little topic would generate so much activity.  I guess it’s really important to see everyone who loves this “hobby”; which is much more than just that would bring so much enjoyment and happiness to us all. 
Thamknyou all again and I’ll report back once I’ve made a decision and my results 

Bobby