Best 845 tube out there?

LinLai are a New Company, which is reported to have a proportion of a Human Resource that were used in other more common known Valve Production Facilities.

More simply put......LINLAI is a trademark belong to a NEW tube factory in China – formed by a team of engineers who exit Psvane in 2019. This story script sounds like an ‘encore’ of how Psvane was formed a decade ago, when a team of engineers exit the state-owned Shuguang tube factory.

LinLai are a New Company, which is reported to have a proportion of a Human Resource that were used in other more common known Valve Production Facilities.

I have been looking into LinLai for a while, as I will one day be exchanging 4 x 845's.
A search will discover user reviews, there are seemingly good reports on the Warranty Offered.

New user review info might be available as I have not looked for quite a few weeks.

Keeping this Thread ongoing is very Valuable and reviving it, IMO,  is always welcome.    

Reviving this excellent thread. I just got MasterSound PF100 845 monoblocks which take eight 845 tubes. They came with basic Shuguangs and I was thinking about upgrading. Elrogs, considering I need eight, are too expensive. Has anyone tried LinLai? The Elite E-845’s are supposed to compare favorable to the ACME for a few hundred less per pair, which when you’re buying eight can save one a bundle. Would love your thoughts, particularly if anyone has experience with MasterSound amps. Thanks. 

After 100 hours of burning I can confirm that I like the WE845 Shuguang better than the 845B, despite the non-consistent construction of WE845 (internal is not as solid and fine built as the 845B, one on my 2 tubes is even weird to look at inside).
So I made another direct comparison by exchanging the tubes and warming them up at least 30 min before listening. 
The WE845 definitely brings more flesh, more tri-dimension soundstage, and punch as well (although this is not what I was looking for). The main thing is the midrange much thicker and "material" than the 845B.
I wish Shuguang could be more serious about the construction of these tubes, whether they are imported directly from China or from TAD, the few guys I know from other forums had the same surprise to see the weird internal assembly of those tubes, sometimes even broken.

I will come back at the end of the week and tell you if some changes are observed. It should obviously, but will it change in the good direction? we'll see. 
Parsons, I indeed have Sorbothane pads under the amp. 
I would like to say that so far what I hear is not an evolution of the 845B, but rather a different family sound and signature. 
More to come...

I'm also interested to hear how Oliver's tubes mature. I am back listening to my Psvane WE845 but I know at some point I will need new ones hence my interest.

Olivier, thanks for the report.  I have what sounds to be a similar system and I notice that "shouting" sensation on a lot of stuff that's new...hopefully you'll hear the voices move back in the soundstage with some burn-in, as you suggested...I suspect you will.  I am coincidentally demoing an Aqua Formula DAC, which by all marks should be phenomenal in all systems, and it sounded exactly as you describe at first--took a long time to burn-in/settle-in and balance out in my system, but it finally did.  Also, check your vibration/isolation of your amps...these tubes might be more sensitive to vibration than the others?  I've found Vibrapods and the like to help mellow-out shouty vocals in high sensitivity speakers, all else equal.  Let us know if the burn-in helps, please--hope it does for you!

Hi all, I received the WE845 Shuguang this morning.
So far they sound less good than the 845B, especially on the treble.
They sound more spectacular with solid mids, definition and huge soundstage, but they shout, not refined at all on the treble.
It seems to me my sweet single-ended amplifier went from 22 watts to a 75 watts shouting solid state amp or a Cayin 500. We'll see if there is any change as the tube burn in a bit. But I am sceptic.
Please remember I am using high efficient wideband speakers with no filters and paper-cone so they are very sensitive and transparent. It could be that the "added" punch of those tubes convince people with low efficient speakers.
More to follow...
Cheers
Olivier

@parsons  That's great to hear! Thanks for sharing your thoughts about the Psvane WE845's with the Melody. Wonder how much time is needed on them to fully settle with their sound...

OK, PSVane WEs arrived in good shape.  They were packed well in foam but not in individual boxes...side by side in foam compartments inside the shipping box itself, but well protected.  They look a little different from each other--the glass tip on the top of one is longer than the other, and the insides of one seem tilted a tad to one side.  In that regard they have a "hand made" look & feel about them, which I'm not sure is a good thing in tubes, but what do I know.  I bought the "top 10%" versions for an extra $100, btw.  I can't actually tell if they shipped from China direct or from Canada--the return address is Canada, but that doesn't mean anything I guess.  They took about 10 days to arrive from when I ordered them.

In short summary, they are very, very good after just 4 hours or so of warm up/burn in.  Hopefully they will get even better.  Tom, they were a lot cleaner and more nuanced than the Suguang A's I thought I liked in the Melody 845 AN the best.  I have no desire to put the A's back in at all.

_____

To ensure I had a fair comparison, I first spent 30 minutes with the Shuguang A's, as mentioned (this is not my main system so I don't do much critical listening on this system), and while they sounded good, they were a tad "nearfield monitor" sounding, even after 30 minutes of warm up.  A lot of in-your-face, front-row feel.  Not much depth to the soundstage at all.  I feel like I was hearing a little roll-off up top, although the bass was strong and solid and midrange was very good.  I also felt like on certain tracks the vocals were a little "hands cupped over mouth" to a degree.  My speakers are modded (new cross-overs) Altec Lansing Valencias from 1970, but I had not felt I was hearing the horns previously and I've had these speakers for about 4 years in almost constant use in some system or another, so I'm pretty familiar with them.  That cupped voice thing, again on some tracks, wasn't something I attribute to the speakers.

The PSVane WEs had a lot more front-to-back depth right out of the box.  4 hours later it's way more nuanced...but still dynamic, and really smooth and lovely.  Tonally it sounds like I would expect in all registers.  No cupped voicing.  Cymbals don't sound rolled-off at all.  The bass is tight with good decay on kick drums, etc.  I would say a slight bit "laid back" vs. the Shuguang A's, in this amp anyway, but still with very good PRAT, and relaxed in the right areas to make it very musical and emotionally pleasing.  They sound neutral to my ears.  Again, very musical and organic like you want.  No fatigue.

I think these sound really close to how I remember the Elrogs sound in my Thoress 845 monoblocks--while maybe not exactly as good, that's a big compliment from my end, given this amp is an integrated and about 1/2 the price of the the Thoress monoblocks alone without a $15K preamp, and the tubes also less than half of the Elrogs.  I don't want to overstate how good they are, but I'm very pleased so far.  I will listen to this system a lot more now.

I may bring the Elrogs back from storage at the new house and do a side-by-side on the Melody again.

@parsons 

Click on the name of the individual you want to "message".  Then click on Details.  In the screen that opens, click on Marketplace Feedback.  You will see a "Send Message" option there.

I need a lesson on how to personally IM folks on this site...I can't for the life of me ever find the right link to do it.

@t_ramey If you want to send me a private message, I had some questions for you and some thoughts on the Melody that I won't take this thread off topic any further than this post (sorry folks!).

Jay

@t_ramey 

Will absolutely do as soon as they arrive.  They appear to have shipped per the Paypal email, but directly from China and there's no online trackability it seems.

As for the recent luck of all of our posters here, that is frustrating on numerous fronts.

I just noticed the tube-sale.com link I posted earlier in this thread where I just bought the 845’s is no longer there. Some crappy looking website is there instead. Shuguang must be having some issues...

@parsons  Please chime in when you get the Psvane WE845’s and have a chance to try them in the Melody. I got a pair of the cheaper standard 845’s from Shuguang and thought they sounded great until today they started to crap out on me. So back to the 845b’s for now. 

Mine was broken at the same place ie on the top near the vertical spacer. It could indeed be that it was broken well before the package because the flash was white ie it looks it had faded since a long time. (forgive my miserable English :)

Thanks for the posts on the Shuguangs...sorry for both of your luck there...that's frustrating on both counts.

@ecll80 I also ordered a pair of Shuguang WE845 recently and they also arrived broken. Mine had broken glass at the top of the tube just where there is a glass spacer.

Personally I do not think it was a packing problem with mine and it looks more like a design defect because the glass spacer causes a pressure point on the tube outer glass. One of the tubes was properly broken there and the other one has a stress crack there and was ready to break, probably when the tube heated up.

I have previously always used Psvane WE845 (which I really like) but wanted to try the Shuguang version because of the ever increasing cost of the Psvane WE845.

Received my WE845 Shuguang tubes.
They do not sound anything special so far, indeed one was broken right out of the box ! I was so disappointed...
The seller will send me another pair, though he admitted he did not take care enough about the packaging.

I own 2 pair of matched Psvane WE 845s that replaced Sophia's best 845s and the improvement was immediate throughout the frequency spectrum.The Sophia replaced Shuguang.Rachael,at Grant Fidelity is wonderful to work with too.

Parsons,
thank you very much for such kind comments.
Charles

@t_ramey  Thanks to you too...please continue to keep in touch as it seems posting Melody 845 owners are few and far between.

@charles1dad    A personal note of thanks for your general knowledge and approach to this "sport"...I find your posts in almost every thread that interests me on this site...I think I've followed in your footsteps on numerous purchases and your findings are always spot on.  You've heard and provided great feedback on almost every tube product I own or considered (and many I own largely because of contributions you've made to the decisions).  No pressure!

Great thread--thanks to all for keeping it going.

Thanks for taking the time to reply parsons, much appreciated!

@t_ramey 

Great question.  My honest answer? ...this thread, mostly.  I reread the whole thread again (I've probably read it through 3 times now over the last 6 months), and some folks whose opinions I trust from other topics seemed to get enjoyment out of the Psvane WEs...and most relative to the Shuguang Bs (and As). 

One poster noted that the Elrogs blew the Psvane WEs away (and I trust his feedback from reading his posts over the years), but since I own the Elrogs, and they didn't blow the Shuguang As and Bs away in my Melody on my my two sets of speakers, I felt it was a decent dice roll to try some WEs for the Melody, since again most posters felt they were an upgrade to the Shuguang A & Bs.  I've never owned any Psvanes of any type for any of my amps, but marketing aside, I still feel like I've read good reviews/posts in general on the brand, and this is their offering that is most interesting to me, despite it's $800 cost for the experiment.

As to why not Shuguang WEs?  Only in that I didn't yet find a side-by-side, other than a suggestion that the Shuguang is newer and based on a better retro design--I can't confirm that.  They are cheaper--which is also interesting to me, but doesn't necessarily mean anything in the rest of this context.

Knowing me, this exercise and discussion may entice me to later also order a set of Shuguang WEs too.  You know--for "science."  My wife asks me when all my "science experiments" will have a financial payoff.  She doesn't like my response is that "the financial payoff went to the product manufacturers."

@t_ramey

Sorry, I totally missed your posted question to me a couple weeks back.

I’m 98% sure that’s what I’m running, but my lettering is quite worn and is in white paint "845" with "made in China" below it--all white paint, with no printed brand, and nothing in red paint. However, from the photos, the physical design appears to be identical in all the parts I can see clearly. I will admit I can’t remember where I got them--I think they came with my used purchase of the Thoress 845s, which I think are somewhere in the 8-10 year old range. Maybe my "As" are that old too?

As to the A vs. B answer, I fear today’s answer is going to be longer and less useful than you wanted, as I’m a little compromised right now in between a (long) move to a new house, and my Thoress amps and spare B tubes are already moved to the new house. Therefore I can’t easily recreate my A vs. B this morning in the Melody. I may go to the new house this weekend and I can try to remember to look for the Bs to bring back.

From memory, I felt that the As were a little more "spirited" in the Melody ("live"), yet without the slight harshness I thought that I remember reading folks often found in the As over the Bs, and that I think I found to be true in the Thoress 845s. I’m pretty sure I had heard an increased "ease" with the Bs over the As in the Thoress amps, but still a very "live" sound--I know I fairly clearly preferred the Bs there, but I don’t know it was night and day. "Ease" might not be a great usage here--maybe I’m thinking less harshness (which wasn’t great to begin with) and a little more soundstage depth in that statement. The Elrogs were a clear step up from both...in the Thoress amps, not in the Melody.

To further confuse matters and make my response perhaps even less useful, I never had the Thoress amps driving my Altec Lansing Valencia 16-ohms, which is what I have the Melody amp driving.  It’s possible with that Thoress 845/Valencia combo, perhaps I would have preferred the A over the B there too? I won’t be able to do that test for several months.

@parsons  Any particular reason you opted for the Psvane WE and not the Shuguang?

On topic, I've just ordered a pair of PSVane WE Replica 845s myself and will report back my thoughts.

Recognizing I'm drawing this off topic, can you let us know what OTL you've acquired, and what speakers you're driving, and any interesting comparisons on sound?  I'm on the same "journey," but like cars, I'm enjoying having multiple amps...doing well in the 845 and 300b's, but interested in OTL for comparison.  If too off topic for this thread, please direct message me if you don't mind...quite interested in hearing of others journeys.

Awesome ecll80. Look forward to what you think of the WE version.

I will get the WE845 Shuguang tomorrow, let them burn in for a couple of days (if not more) and will let you know how it goes on.

t_ramey, on my amp the 845B (without top mica) was a nice improvement over the standard in terms of soundstage and treble.

@parsons  Good to know about the Elrogs in the Melody, they're pretty pricey. How would you describe the difference between the Shuguang 845A and B?

Are these what you're using?

http://www.tube-sale.com/index.php/tubes/shuguang/shuguang-hifi-845/

@t_ramey

I’m running a Melody AN845 in a 3rd system...also very interested in findings of the best 845s for this amp. I have Thoress 845 monos that I’m running Elrogs in, and they are awesome and a clear upgrade from the Shuguang As and Bs in the Thoress amps. However, they didn’t make the same music in the Melody...not bad, but I think I preferred the As in the Melody over all other pairs ironically...including the Melody branded 845s. I have the Melody driving some Altec Valencia 16 ohms with updated crossovers and its an awesome 3rd system, but I am interested in maxing out the performance, and curious about the WE 845 types that might be compatible with the Melody.

That's funny. I've always heard the best 300b tube is a 2A3. 

I can attest to the many sonic attributes of the 300b, however I also  like the 845 very much. Depending on the speakers involved, some may certainly benefit from the additional (3-4x) power of an 845 output tube. Either tube is capable of exceptional sound quality. 
Charles 

best 845 is a 300b 

@ecll80 Looking forward to your impressions of the WE. I’ve been contemplating upgrading my Shuguang 845B’s to the WE version on my Melody AN845 amp but haven’t pulled the trigger. I have heard though that the Melody amp doesn’t exactly show big differences between the B’s and more expensive 845 tubes. But I do have friends with LM gear that have had good success with the Psvane WE845 making a nice improvement.

Hi Guys, I have ordered a pair of Shuguang WE845 to replace my 845B without top mica. 
I am using a Line Magnetic LM518ia. 
Now waiting for the post to deliver the beauties ;) 

How does the KR Audio 845 sound?

Below is a more updated version of the Psvane / Shuguang relationship and history. There are a few contradictions to ecll80’s post.

http://psvanetube.com/sitetemp/who-is-psvane/

This is/was a great thread.  

What are the latest 845 tube impressions people have?  Might as well keep this info in the same thread so it's all together.

I've got some Elrogs en route this week.  I've been enjoying 845Bs in both my Thoress 845 monos and my more recently acquired Melody AN845 (for a second system).  The Elrogs seemed like they'd be an upgrade but we'll see.  The 845Bs were better/more nuanced than the Melody-stamped 845s that I got with the Melody amp--not sure what brand they are, but they appear to have brass bases.  Not bad but seemed more forward with less micro-dynamics than the 845Bs.

I would like to try some Psvane WE845s or the Shuguang WE845s for comparison, but a couple threads it seemed, quality addressed, the Elrogs were at least a little better.

Please post recent 845 experience/thoughts.

thanks...

 I  also would like to know people's opinion on the above comparison as well, as planning to get a 845 based amp... ANYONE? Thanks so much in advance ....

Any one compared Psvane WE845 vs. Shugang WE845 replicas?
I am interested in getting Psanve WE845 for my Cary 805 AE amps based on the overwhelming enthusiasm of some of users here.  Then, checked eBay and found Psvane WE845 at ~850/pair and Shugang WE845 only ~$450. I just want to know whether there is any significant sonic difference between them?

Hello all.

i am listening to a Unison Absolute 845. At the Moment i am listening with WE 845 and it sounds great. Best sound i listened to.
Fantastic tubes. I am planing to buy a Quad of KR 845 and i wonder if anyone here knows if they work with the Unison, since there heating filament is only 1 A? Did anyone compared those 2 tubes?
I was listening to the Elorogs as well, but there fabrication level is not really nice for 1400Euros Pair.

Sorry to hear about your problem with Sophia.You would think that at the very least tubes that are chosen to be used by the mfg. of the amp would not sound bad.
in the past i purchased 845B tubes from Sophia and had no problems.
But as you know anything can happen in this hobby.

Goldeneraguy I have Sophia 845 amps, the ultimate top of the line ones, with their brand of tubes. Their tubes have reliability problems and are merely rebranded TJ. When you try to get a refund warranty Richard just blames you and offers you a new one at half the price. That is still more then a shuguang Metal plate and they do not sound as good.
Also I have had five power transformer failures they combine a filament transformer in the power transformer and filament winding keeps failing. Finally modded the unit and put in separate power and filament transformers by Hammond and have not since had a problem.
I would have gotten rid of p.m. but I do love how they sound. They do rock and do everything perfectly.

Goldeneraguy I have Sophia 845 amps, the ultimate top of the line ones, with their brand of tubes. Their tubes have reliability problems and are merely rebranded TJ. When you try to get a refund warranty Richard just blames you and offers you a new one at half the price. That is still more then a shuguang Metal plate and they do not sound as good.
Also I have had five power transformer failures they combine a filament transformer in the power transformer and filament winding keeps failing. Finally modded the unit and put in separate power and filament transformers by Hammond and have not since had a problem.