Audio Aero Capitole MR2 owners that are looking for much better sound quality, need to replace the (4) yellow caps that are parked near the XLR output connectors. The replacement caps are: Black Gates type N , non polarized 10.uf 50v. The yellow caps are very poor quality to be put in any signal path. The replaced caps removed the upper midrange grunge and improved the dynamics and sound stage. The parts cost me about $40 and I did it myself. This mod should have been part of the SE upgrade. Sam
This player was dead when I bought it at a garage sale for $50.00 bucks. Hence no warranty . It did come with the shipping box and remote control. Found that the CDPro 2 drive failed. Pro music jute boxs run the same CDPro 2 drives. Cost me $295 shipped brand new. We also added two extra XLR output plugs for bi-amping. Hexfreds diode bridges in the power supply were installed for a much improved sound. The Jute box CDPro drive did come with the same software ver 6.8 ! Sam
My audio aero was doing the same thing. Can you see if the disk tries to spin up? Do a power down,unplug the unit.Now power up the player and see if tries to read the disk. How soon do you get the no disc error? Does your owner manual tell you what Cd drive is in you player? CDPRO 2 ? I changed out the cd drive with a used one from a jute box (CDpro2). The no disk error problem was gone. Disk spun up and read the disk.
hi My audio aero capitol reference swithes off while playing the CDs , all of sudden. sometimes when i press the standby switch of the remote comtrol twice it starts again. some times after opening the lid and closng it starts again. some times it takes a long time for it to start again.
any body have any comments on the problem. transport or something else.
Problem was cleared. problem was with AC/DC power module KAM 3005(chinfa taiwan).Sometimes this module will not give enough current to the IC. mine works perfectly well now after the replacement.
NEW POWER MODULES ARE UPGRADED chinfa calls it KAM 3005 - level 2
You must have a verified phone number and physical address in order to post in the Audiogon Forums. Please return to Audiogon.com and complete this step. If you have any questions please contact Support.