Anyone NOT like the sound of VPI?


I'm wondering if I'm just not a VPI guy. Bought a Scoutmaster with signature JMW arm and a Shelter 501 MKII cartridge. This was after buying a Rega P3-24 with an Elys II cartridge. Thought the Rega was very dark sounding (at least with that cartridge).

The VPI sounded unnatural to me (no midbass whatsoever). Thought it was a bad cartridge, but recently heard a Scout (with signature arm) equipped with a Dynavector cartridge. This was on a system at a retailer where I was auditioning speakers and I didn't think it sounded much different from what I have at home.

While I hate overdone midbass, I certainly miss it if it's absent. I'm wondering if I'm just not a VPI guy and should try something else - maybe a Rega (P5?) with a different cartridge...

madfloyd
The tables are probably fine. I heard an entry level model recently and it sounded fine. Probably just need to match the cartridge, as Audiofeil indicated. The Unipivot design is new to me and not sure what to make of it yet, but it would not surprise me if bass was impacted with a low compliance cartridge in the Unipivot.
So, is it fair to say then that MM sounds darker than MC?

As I mentioned, I've heard two different VPI tables with different cartridges in different systems and they both seemed to be bright sounding. Only thing in common was the Signature arm.
Nordost wiring is awesome, but is also very revealing of problems in your system. It takes time and patience to find the sources of any problems in your system and eliminate them.

My current setup comprising a Scoutmaster with a JMW 10.5i has no problems with bass or treble. Bass is deep, controlled and solid. High notes are silky smooth.

I wouldn’t consider switching turntables because as good as my system sounds now, I’m still not done. Turntables are mechanical devices and it is very easy to change the sound of your turntable.

A friend of mine was having trouble with a Technics and fixed his problem by putting it on a more solid foundation.

My Scoutmaster sits on a Gingko Cloud 11 with Herbie’s 2” grungebuster balls. I placed 15 lbs on the Gingko Cloud 11 underneath the Scoutmaster, which dramatically increased the soundstage and eliminated almost all the noise.

The point is, it doesn’t really sound like your system has been correctly set up. If you experiment with your system, you may be able to isolate the real cause of any problems in your system and come up with your own solutions to fix them.
Madfloyd, I've complained about a similar problem on these forums as well. Specifically, a relatively lightweight tonal balance, the bass doesn't have enough impact or fullness for me.

I'm not ready to give up on my Scoutmaster with 10.5i arm at this point, however. Many on this forum feel VPI's sound fine, so I'm willing to do further work on my setup.

As for the problem, I suspect the relatively low mass of the VPI arms could be part of the problem, you do have to use a fairly high compliance cartridge with these arms, particularly the 9" arms. Changing my 9 arm to the 10.5 arm helped out the bass to some extent, the higher mass of this arm is likely helping here. I also recently added about 40 lbs of lead weight to the Bright Star Big Rock under my tt, this further helped out the bass.

Beyond this, who knows where the problem lies. It could be cartridge alignment, the platter, rubber belt (I changed to thread drive), acrylic platter, tt isolation, cartridge, my phono stage. Every one of these things has been mentioned as possible culprits by audiogon members answering my posts. There are so many variables in tt setups, its difficult to pin it down to any one thing.

I've also heard from some who don't care for the VPI sound, it seems they think the VPI lacks musicality. I wonder if this is a lack of satisfying warmth in the lower frequencies.

I next move will be replacing the Sovtech 12ax7s in my phono stage with Mullards, then a different cartridge alignment with the Mint Lp. If I'm still not there, I will be changing out the capacitors in my phono stage to Mundorf Silver/Golds or VH Audio TFTFs. If the bass is still lightweight after these mods I will be much further inclined to blame the VPI. Still, a better cartridge and the super platter may be needed to complete the setup.

Based on my experience with my VPI to this point, I would have to say the VPI Scoutmaster is not a plug and play unit, its simply not a finished product without all the upgrades. The upgrade path VPI offers makes it easier to get started, but it sure sucks to think you aren't getting all the turntable has to offer without those upgrades. I have a feeling the Scoutmaster is going to end up being at least a 6.5k investment rather than the 2.5k investment I initially thought it would be.
Josephtorres brought up another aspect of Scout ownership that's not been discussed yet. The Scout is VERY dependent on a good platform of some sort to flesh our it's sonic signature IMO. I'd forgotten that when I first set up my Scout and listened to it, it did lack some mid bass weight and disappointed me a bit. At present, I'm using a thick maple platform which totally cured the perceived lack of balance. The Gingko is another route I'd definitely consider. All this said, the Scout still didn't sound bright without a platform. It still sounds like you've not optimized the cartridge for the rest of your system. What sort of phono preamplification and phono interconnects are you using?