Dear Nandric, I left Connecticut nearly 40 years ago in order to move to Washington, DC, and I consider Connecticut to be my native language. Moreover, I still tell people I am from New England. |
I really enjoy the HA with the H. As you said, the sound stage is really enormous and holographic.
Oh, I thought of another thing: When I plugged my network streamer in the system, the wireless router did cause some noise to come through the phono stage. Once I removed that, the noise went away right away.
|
Thank you. I was talking to another individual and he said he had no hum issue as well. How do you like the HA added to the H? |
I use an H3000 with an HA3000 and don't have any of the hum issues that you describe. I use the setup with both a DV XX-2 MkII and Kiseki Purpleheart. You may want to make sure that the tubes are seated properly as they can become dislodged during shipping.
|
Greetings Nandric. I am sad to read about your cartridge hum problem. Bummer. Do you have any other Glanz MFG carts? My MFG61(and all other Glanz carts) and Allaerts Formula 1 have no hum issues with any of my phonostages. I have experienced that dreaded sound with a couple of my other vintage carts, all uber low output when I used the H3000 or NVO phono amps. I'm sure you have tried all normal remedies so I will not waste your time with that.
Bonne chance. |
Dear Lew, To me those details which you mentioned looks like variables. You of course know that there are many while each variabale needs some value to make sense. While I left Serbia 50 years ago I still think that Serbo-Croatian is my ''native language'' Here is an Serbian saying which I like very much: ''you will be sorry for what you have done and also for what you have not done''. We all are free to make our choices but, alas, there are so many. Like ''to many variables'''. And yes you are right about people divided by the same langauge. The Serbian and Croats are willing to start a new war in order to decise which language is older: Serbian or Croatian . BTW the Serbian don't need any reason to start a war. ''Pure passion'' so to speak(grin). |
You are known to me as a polyglot. This is why I did not mention any specific language. I would not know which language you consider to be "native", the language spoken by your parents, perhaps. Serbo-Croatian? If ever there were two peoples divided by a common language, those are them.
|
Dear Lew, What do you mean with ''the devil''? Someting like Pegasus or unicorns? Also what do you mean with ''my languge''? I have at least 3: Serbo-Croatian, Dutch and German. My modesty does not allow to mention English and Russian(grin).
|
Nandric, There must be an equivalent in your language of "the devil is in the details".
|
Dear Lew, You are my English teacher. That is to say that whenever I don't understand some English expression I ask you for explanation. However methaphors belong to other kinds of expressions. I also know that the expression ''Lord'' has no bearer. To put this in linguistic terms: ''Lord'' is a name without reference. So ''my Lord'' is a way of speaking. I am really wondering, why the hell my two best carts have hum problem? I would be much less disturbed by any other of my 50 carts (grin). |
The question, Nandric, is why you think the Lord gives a darn. For me, it's is there a Lord at all. |
Hi vetterone, glad to ''see'' you back. Whie hum is considered to be a kind of enigma I was confronted with this problem only twice: with Glanz MFG 61 and Allaerts MC 2 ''gold finish''. My enigma is ''why my Lord ?'' with my best ever MM as well MC cart??? |
What cartridge are you using? As said above, the issue is unlikely the H3000, it is the head amp causing the hum. I fought hum with my HA3000 when I used low output carts. My experience was that if the cart output was under .3 to .35mv, there would be hum. When using a cart with .5mv, it was fairly quiet but never dead quiet.
Tried two different HA3000's and same results. |
It is typical hum coming from both channels. Thank you for your suggestions.
|
Vindanpar, I don't think that you should conclude the situation is hopeless. Are the two units plugged into the same electrical output or into different outlets? Make sure they are plugged into the same outlet. Also, try using a cheater plug to remove the HA3000 from AC ground, if the H3000 is correctly grounded itself using a 3-prong plug. The HA3000 will still see AC ground but only via the IC that goes to the H3000, and this is safe. Finally, try flipping the polarity of the cheater plug. All of these tricks will affect ground loops, if that is the problem.
If the tonearm is grounded to either unit, try grounding it to both and then try un-grounding it entirely from either unit. Same goes for the turntable.
Somewhere, somehow, there is a specific combination of grounding and un-grounding that will be the cure. But I say this on the assumption that you are hearing typical hum that arises from grounding problems, not white noise or hash or buzz, and that the problem is audible in both channels. |
Well I communicated with someone who has the HA. He told me the hum issue for him existed as well which he found so distracting he no longer uses it. This is disheartening news indeed. |
I have long wondered about the philosophy behind marketing the HA3000 as an add-on to the H3000. The latter unit is revered for its very high quality built-in amorphous core SUTs that also offer quite a bit of adjustability. Why create the idea that a "head amplifier" is a viable alternative to using those SUTs? Anyway, it is odd that the OP has a hum problem. I would consult the US or Canadian importer(s). They're both very good and responsible. |
Same here, I have had the H3000 for several years without the head amp and have encountered no problems. It is dead quite and has been very reliable.
It sure sounds like a ground loop issue. That can be tough to find and cure. Good Luck.
|
I am using H3000 but again, not HA. It sounds like a ground loop issue between the two stages but Mr Park I am sure would have allowed for this in the circuitry, perhaps using a diode.
H3000 is a really wonderful amplifier, and very quiet..
Rgds,
Paul
|
Try:
Albert Porter
Post over on WBF and call out for Carl- his handle over there is "cjfrbw" (Perhaps he posts here too).
Christian/Rockitman, who I'm pretty sure has the head amp.
|
Yes it's just the head amp. Mr Park is a talented man and I think his work is excellent I just wish I could get the hum to be not so distracting when the music stops. I wonder if this is a characteristic of the component? I'm wondering if I'm doing something wrong. I bought the silent as a mouse H3000 through David Beetles and got excellent service from him.
|
I have the H3000, but not the head amp. No hum, I had some tube squeal that was solved by replacing the tubes-supplied by Allnic through then distributor David Beetles. If you are in the States, Albert Porter is now the importer. I know one guy-- Carl-- who posts on What’s Best Forum (not sure he posts here) who uses the phono stage with the head amp. Christian, aka Rockitman (who does post here) has the head amp, I think, but uses the bigger DHT phono section from Allnic.
If you bought it used, you may simply be having some translation difficulties with Allnic. Mr. Park has been pretty accommodating to me.
I’m speculating it is the head amp, right? You don’t get the hum if you go in without it? |
