Anthem's room correction software is what puts it above the rest. The latest version is so much better and gives the end user a lot of flexibility to tailor it to your liking
Anthem MRX 720 Question
A fair number of people rate the Anthem 520, 720 and 1120 receivers highly for their sound and room correction software. I'm getting close to pulling the trigger on a 720 but have a concern.
Many of the forums talk about HDMI connectivity, receiver lockup, firmware and various other issues. To be fair, it seems like those discussions dropped off in recent months presumably as newer firmware became available.
Does anyone have recent experience with the 720 they can share? Have the HDMI, receiver lock-up and PlayFi issues been resolved? Were those issues unfairly highlighted? A demanding forum audience could make something appear bigger than it is.
I'm replacing a Yamaha RX-A3050. With the current setup if I select FIOS, ROKU, BluRay, Spotify, Chromecast etc from the Harmony remote, a lot of activities happen behind the scenes; devices power up or down, inputs are selected, amps and fans turn on - and it all works every time even when I switch between activities. Yamaha's switching is impressive since it rarely has HDMI/HDCP handshaking issues. I love that since recovering from those issues usually involves recycling the power to the receiver, TV and/or device.
I want good sound but don't want to lose the reliability and ease of use I currently have. I'd really appreciate hearing what others have experienced with their Anthems.
Thanks in advance.
@dawgbyte Not sure how long it’s been since you’ve heard a Yammy AVR, but I’d highly suggest giving them another listen as that’s the exact opposite of what I heard in direct comparisons to other comparable AVRs nor is it consistent with any recent reviews I’ve read of Yamaha AVRs where they consistently receive high praise for their sound. Also, when you’re ready to purchase I’d recommend using accessories4less (no Anthem though) as they have a great reputation and you can get excellent discounts for “as new” equipment. Dig your speakers BTW — great-sounding speakers I’m sure are still competitive today.
|
@soix I would never let a YouTuber sway me and I have not ruled out Anthem or anyone else. I I want an upgrade from the Denon, that’s my primary objective. It also has to have all the latest decoding software and stream music content from Spotify. I need it to drive my home theatre speakers for movies and make my Hales T-5’s sing. That said, I've never been a fan of Yamaha gear. I've always found their receivers place a veil over the music. |
@dawgbyte Please don’t go by this guy — he’s a YouTube hack who doesn’t have a clue what he’s doing. Look where he has his KEF towers positioned against the wall and in the corners, and he uses tone controls on the Arcam, both of which are just silly mistakes no experienced audiophile would make. You’d be much better off reading reviews from more reputable publications like Soundstage, Sound & Vision, etc as you’ll get much more rigorous and accurate representations of what equipment actually sounds like as opposed to this sham of a “review.” That said, I got to compare the R30 with the Yamaha RX-A3080 directly using B&W 805 D3 speakers and my best audiophile recordings. The Anthem sounded like you’d expect an AVR to sound, meaning it was just ok and certainly nothing special. The Yamaha on the other hand projected a larger, deeper, clearer soundstage with 3D imaging I more associate with good stereo separates or integrated stereo amps. It was head and shoulders above Arcam, Denon, and Marantz in a direct head-to-head comparison, and it also has superior reliability as well. Don’t let the goofball in the video put you off on Anthem — it’s an all-around better AVR than even the Yammy but also more expensive, so let that and features be your guide. Just my $0.02 FWIW, and best of luck. |
Yamaha and Anthem are my two fave AVRs for both sound and reliability, but if I had your speakers I’d definitely go with Anthem because I think they’d appreciate the the higher level of performance and refinement. Issues seem to be hit or miss, but I’d expect a company like Anthem will stand behind their products and provide fixes/updates/support when necessary. Then again, if the issue is ongoing and frustrating return it and go with one of the new Yammy AVRs because they’re getting solid reviews and I’m sure will still sound very good in your system. I demoed B&W 805D3s with the RX-A3080 with my best audiophile recordings and it did a surprisingly excellent job portraying all the nuances along with 3D imaging and a large, transparent, and deep soundstage that reminded me more of good separates than what I usually hear from mass market AVRs. If they can pull that off it’s hard to see them falling short in an HT setup. Just my $0.02 FWIW, and best of luck. |
I have an 1120 Anthem and the software is poor no comparison to my Integra. One of the amp has failed and it no longer switches correctly. The sound is ok cause I use my PASS LABS for the two out side speakers. As for the Audio return channel that’s a joke on Anthem equipment they have no idea how it works . The product is a solid F
|
The Yamaha 3050 has YPAO which does OK with room correction but varies greatly each time you do it. The Anthem's room correction is supposed to be best in class so I'm excited to hear it in actios. I think I've come up with a solution for my situation. I'm going to use the Anthem to power the 5.1 system and Zone 2. Then I'm going to use the Yamaha with a feed from the Anthem's line outs to power and control zones 3 & 4. I believe I can do this in such a way that you won't need a degree in computer science to turn it on ... and have good sound! The real issue as I have learned is sending a 5.1 signal to the main zone and a 2 channel downmixed signal to the other zones and have the sound be in sync on both. This is super important if say your 5.1 is in the family room and you have zone 2 in the kitchen which is next to the family room. If they're out of I didn't realize until I got into this how few receivers can do this. Most receivers downmix the main if you send the audio to another 2 channel zone. The Yamaha can keep the main in 5.1 and send down mixed audio to the other zones. I am told (but need to verify) the Anthem can do this as well. If true, I should be able to get the best of both worlds - good sound in the main, all 3 of my other zones in sync and easy to use. If anyone's interested in the details, happy to share. |
Myoungva, we are Anthem dealers i have a Mrx 720 and have never had any major problems with the Anthem receivers. We just did a full Kef CI 3160 THX Theater being fronted by the 720 with an Epson Laser projector. The system sounded fantastic and the Anthem room correction is nothing short of sensational. Anthem is very good about firmware upgrades. I have one in my own Living Room theater and it is used every day never an issue. Dave and Troy Audio Doctor NJ |