Acoustic panels: ATS vs GIK

That's interesting!

Go for what you can get quicker/cheaper, assuming the absorption coefficients are similar.

I'm about to need an entire room fulll, so I"ll keep this in mind. 

I have to say though, the GIK soffit traps are amazing! If you have the room to stand them up, check them out.

@erik_squires its almost exactly $100 less than GIK, and that is with the upgrade to Gilford of Maine cloth. If I add the Guilford upgrade onto the GIK order that would add an additional ~$100 to that, making the difference now $200. 

And they're in IL.

I have used ATS panels with the Guilford upgrade for many years.  Well constructed and beautiful accent to the room.  I have two corner bass traps, 4 - 2’ x 2’ x 2”, 4 - 2’ x 4’ x 2”, 2 - 2’ x 2’ x 4” panels in my 14’ x 16’ x 8’ dedicated room. I started with 2 of the small panels I acquired used and the factory supplied me new cloth to recover them. The subsequent panels were purchased direct from the factory. There was about a one month production timeline when I ordered.  Excellent company. 

This is interesting, as I've been comparing GIK to ASC and GIK was so much less expensive. 

I'm looking at doing an entire listening room next year so price matters right now. :)

In my experience, ASC has provided higher quality construction than GIK, but at higher cost. I’ve used both companies happily and also have a few BAD panels from RPG and some diffusers from Vicoustic. I have not used ATS yet; didn’t know they existed, but I’m glad to hear about them.

The thing I really like about GIK is that they publish test results for every product, so you can see what the absorption is at different frequencies. It’s easy to determine from their Web site that, e.g., a 4" thick panel (made by anyone) won’t do much below about 80 Hz. The GIK Soffit Traps go a bit lower.

I would caution you not to use only "acoustic panels" that don’t include some reflection or diffusion. ASC uses reflective strips under the cloth of their panels to avoid over-deadening the room; GIK offers their Alpha panels and range limiter option to do the same thing; RPG BAD products are designed to balance scattering and absorption. A room using only plain absorbers easily can sound too dead.