Acoustic Foam Panels - Blu Tack ???

Havew used blu tack many times but thin about how pourous foam is.You'll never gewt it to work alone.Try Scotch brand hooks that have and adhesive that is supposed to not damage paint.Uses compound and tension of same to hjold.You'd need a few.Me I'd maybe make one hole and hang it like picture with wire if you can super glue wire to foam which is iffy.Scotch hangers at Home Depot is what I'd try first.
Cheers
Chazz

I've thought about this myself. The idea of using adhesives on a wall is unpalatable, it's absolutely going to leave a mess to clean up when they come down. Panels function better if there is an airspace behind them, so with that in mind this is what I'd do. I'd mount two 1x2's slightly smaller than each panel on the wall, screwing them into plastic anchors (assuming drywall construction.) Then you can glue the panels to the furring strips. It's really easy to repair the holes in the wall after removing the anchors in the future IF you've got a bit of the wall paint or wallpaper saved for repairs.

I don't think the Blu Tack is strong enough to hold the panels. If you can get them to stay up initially, they are likely to pull off after a little while. Chazz' and Photon's suggestions seem like better ways to secure panels.

If you have sheet rock walls, medium length common pins will work fine for smaller panels, say up to 2' x 2'. Be sure the head of the pin is secure (many plastic tips will come off rather easily), and that you try to distribute the weight evenly using multiple pins. For bigger panels and/or items like rigid diffusion panels, I use quiltmaking "T" pins. All leave minimal marks, are easily repositioned, and hold a surprising amount of weight.

-Richard

I recently bought some new acoustic foam panels here and found that command strips do a good job of holding them up without causing damage to my walls. Before that, I took a load of paint out and had to fill it all in. It took me ages to find the right shade of white to cover it up.

I'm guessing that the OP has found a solution in the last 14 years, but here's what I recently bought to deal with this same issue -  https://xfasten.com/collections/best-sellers/products/xfasten-acrylic-mounting-tape-removable-1-inch-x-450-inch

It seems to be more than strong enough and peels off without leaving any residue.  It's similar to the little double sided removable glue dots, but stronger.

Thanks big_greg for the tip on the XFasten tape. I'm going to give it a try.