twl

Responses from twl

older LPs - different EQ?
There are some different eq. curves in the older records. Columbia, Decca/London, another one that I can't remember, and the current RIAA. And yes there are some phono stages that have selectable curves that are built-in. Don't ask me to name one,... 
next step? just got the phono stage Arc PH2
I'd use the B&O and wait till Feb for the bonus. 
Preamp Deal of the Century
Yes, Bryan, Albert runs Soundlabs, so the "woofers" weren't pumping, but he had a feedback like sound coming out. It was frustrating, but he eventually found that there was something causing the IO to vibrate and cause this problem. In his case it... 
Suggestions on $1k used preamp w/ phono
I'd suggest a used MFA Magus, or used Audible Illusions Modulus. If you can get the John Curl phono board with it, that would be a plus. 
New cartridge for my Teres/Graham setup
Nice purchase! If I were selecting a cartridge for that setup, I'd go with a ZYX R-100 Fuji - low output version. The Fuji is a world class cartridge that will run head to head with just about anything, and costs only about $2k retail. I think it ... 
What would it take to balance a stereo power amp ?
Of course, I'm sure you realize that I wasn't inferring that adding the adapters would change the topology of the amp to balanced. The adapters are simply a way to allow him to use the cabling he wants. 
Preamp Deal of the Century
Bryan, Albert Porter was experiencing a similar problem with his IO. It turned out that by placing a small weighted bag of shot on the lid, the problem went away. The frequency of his problem was different than yours, so this may or may not work i... 
A Shocking Experience
Yes, it sounds like you are the static generator, and not the turntable in this case. Don't drag or scuff your feet on the carpet, and you'll generate less static. 
Preamp Deal of the Century
Bryan, the Aesthetix IO is possibly the best phono stage ever made. It will be pretty hard for anything to compare favorably with that unit. And when you get to the dual power supply IO Signature model, and equip it with all NOS tubes, then it is ... 
Anti-skating problem
Good work, Marty! 
rega planar 2 - platter won't turn
Sounds like the belt is slipping. Probably needs a new belt. 
non-magnetic screwdriver for cart. installation
You can just use a stainless steel screwdriver that will work just fine. It won't hurt the cartridge, it only makes it so that the screwdriver isn't pulled off the screw toward the magnets in the cartridge when you are tightening it up. If you can... 
To Rack Mount or Not
Agree with Stehno. I use the StarSound products and find them to be excellent performers. The Sistrum racks and platforms are engineered to evacuate the vibrations from the system, and work very well to do it. The AudioPoints are at the base of th... 
Help with 30th anniversary DSOTM vinyl?
Maybe the thicker vinyl is causing your VTA to be affected, and causing the sibilance. 
Opinions on why this system is uninvolving
Bryan, I know you are an analog lover. That is why I am trying to make suggestions. I do believe that you can find a table to your liking that will be at a higher level. There is something out there that will "float your boat" in all the respects ...