theo
Responses from theo
| Speaker break in period Mbhcid is right! New parts are stiff and must perform at a fast continuous rates of vibration. Just a new shirt is more comfortable after a few washings. The compliance of a speaker must be flexable and present no resitance to the cones excursion.... | |
| Cartridge for a Rega P2 go with a Rega cartridge for value. | |
| interconnect vs speaker cable Start with the interconnect. The signal path starts there.Buy the most expensive cable you can afford, after a lengthy trial period of sampleing different brands and levels of those brands. I love Cardas, but not all their cables deliver the same ... | |
| Is High End Cable Really Worth It and What Brand Good advice from JD, but I must add YES they do make a difference. I have gone from Monster to Tara to Audio Quest to Audio Majic and now Cardas. Ironically I wanted to buy Cardas years ago but didn't due to the investment.But I must add that I wo... | |
| What speakers to Buy. Big Room -- Bookcase App. As a owner of the MX134 and a MC7205 (the five channel version of the 206) at 200 watters at 4 ohms I can recommend the Linn Katan a great sounding little bookshelf speaker and only about 900 hundred a pair. Another graet choice in a higher price ... | |
| Best Amp For Infinity Kappa 8.1 Speakers As longtime owner of Kappa sevens I recently purchased a McIntosh MC352 and these speakers came alive. Kappas love power! Look at Bryston, McCormack, Sherbourne in the 300 @ 8 ohm range or don't waste your time the Kappas need the power to fully r... | |
| Vienna Acoustics Vs Sonus Faber I have listened to both and would buy the Beethovens based upon the following:1-more cabinet colors available2-most musical with tighter bass(for music listening)3-better looking4-nicer cabinets5-better drivers6-better crossoversboth speakers are ... | |
| Rega P25 Tonearm Lift My suggestion is that if you have a heigth problem with your lift then you also have a (vertical tracking alignment)VTA issue that needs resolved.Contact Amusicdirect.com and buy the EASYRIZER for the rega and install it then set your VTA and you ... | |
| Which From my recent conversion to the Golden Reference, I can strongly suggest the GR's over the Nuetral ref's. I did an A/B in home comparision and thought the NR's were very accurate and precise, the GR's were all that and added a much better sound s... | |
| My VPI junior doesn't have aground lead If your not experienceing and RF hum don't worry. If you are then try finding a chassis ground that will minimize the hum. | |
| Why would my CD player start skipping? Try taking a can of compressed air and dusting of the lensit just may be dirty | |
| Turntable Set Up Questions again? Here is my opinion based on years of experience with vinyl, in response to your questions1. I say stay with the maximum tracking force and do not exceed it at all. the designer of that cartridge is telling you that the 1.5g is where the sensativit... | |
| Copper v. Silver It all comes down to your ear. Listen to a good silver cable then switch to a good copper, the a hybrid copper silver.I recently replaced my AudioMagic Excallibur II's ( a silvercable) and wnet to the Cardas Golden Reference. Big difference in det... | |
| Diana Krall I seriously doubt that the record company would have re-released a bad recording in SACD format if the master didn't justify the expense or the perceived sales didn't excist. | |
| What's the best isolation system? I have tried several things from Iso-Bearings to Vibropods and have had the best results with AQ Sobethane Feet under my turntable. On my CD players I use the Paulsen Platters which are no longer made bu are in breif a platter riding on apposing m... |