sbrownnw
Responses from sbrownnw
| setting VTF with a digital guage I measured out a stack of cds plus my scale as tall as the platter and mat with a record on. I then took off the platter sand used the cd scale stack to set the VTF. The diff was .07g and I have my ortofon mc-3 turbo tracking at 2.05g and my RP6 i... | |
| VTF issues I measured out a stack of cds plus my scale as tall as the platter and mat with a record on. I then took off the platter sand used the cd scale stack to set the VTF. The diff was .07g and I have my ortofon mc-3 turbo tracking at 2.05g and my RP6 i... | |
| VPI Traveler vs Pro-ject Xpression III? @stevecham, does this mean that tweaking a VPI SDS to run a tad fast with a VPI turntable with not result in more noticeable PRAT? If so, yet another reason why I am glad I have a RP6 instead of a Traveler that replaced my Xpression III. | |
| No more delays for posts showing up? Did anyone see the domain expired landing page this morning? Hacked or just poor website / DNS management? | |
| VPI Traveler vs Pro-ject Xpression III? I think the PRAT acronym speaks for itself if you listen, plus it helps having a musician / musical background. | |
| help with RP6 setup The mc-3 turbo for $350 and a Jasmine LP 2.0 mkII phono stage for $499 plus shipping comes in under your $1000 limit and is a great combo with my RP6. The Jasmine is much better and more flexible than the Rouge stage. | |
| VPI Traveler v1 vs v2 comparison @zennblaster: yes, platter startup assist helps extend belt life. Even doing this, i could not eliminate the startup chatter on the V2. | |
| VPI Traveler vs Pro-ject Xpression III? I would have used the ortofon mc-3 turbo, so that is a fixed cost of $350 and puts the Xpression lll at $1050 + $30 more for a clever clamp. It puts the Traveler at $1750 and puts the RP6 at $1850 + $25 for the diuble-sided suede mat I am using. Y... | |
| No more delays for posts showing up? There are two levels happening here. First, threads (new ones) must be approved. Then, if they are they must be loaded into the cache for the next cache refresh. Same with thread replies, the make it into the cache for the next cache refresh. Both... | |
| VPI Traveler vs Pro-ject Xpression III? The Rega RP6 beat the two others out, IMHO. My Rega has an Ortofon mc-3 turbo like my Xpression lll. It has the PRAT and the imaging I was looking for. :) | |
| help with RP6 setup Ortofon MC-3 turbo and a double-sided suede leather mat sounds great on my RP6 | |
| Turntable Swamp. . .what to buy? @djwilbourn, I'm having a RP6 setup this weekend and will be using a double sided suede leather mat instead of the thin sound factory wool one. Many say this is a great sounding combo.I was in possession of a V2 Traveler for 1 week. Didn't put a c... | |
| Vip Traveler verses Rega p6 - Photo Finish? A lot of people note that the factory mat on the Regas are very thin sounding. Getting my RP6 setup this weekend and it will have a leather (suede on both side) mat to start with. | |
| VPI Traveler v1 vs v2 comparison There is A LOT of startup belt chatter with the V2 | |
| Best MC / MI under $500 with slide on stylus guard Has anyone done a 3 way comparison of the MC-3 turbo, the 2M blue and the Soundsmith Otello? |