sbrownnw
Responses from sbrownnw
| Quick poll: Rega RP6 or Marantz TT-15 ? I love my RP6. I don't like Rega cartridges check my posts for more details. I don't like the Marantz look and I have not heard it. | |
| variance of +/- 10 Hz with 1 kHz test tone Yes, nicely laid back with more definition between the notes plus a little more warmth. I guess Rega took the shortcut with the white belt upgrade, like other turntable manufacturers (pro-ject), thinking a faster running table sounds better. I dis... | |
| variance of +/- 10 Hz with 1 kHz test tone Ok, did some more tests today. Found some more things about the iphone app and the differences between the Rega white and black belts.First, the iphone app. Sometimes if you let the test tone run out to the end of the record or lift the needle whi... | |
| variance of +/- 10 Hz with 1 kHz test tone Some interesting reading here:http://www.vinylengine.com/turntable_forum/viewtopic.php?f=32&t=65143I still think i will be sending back my TTPSU for verification of settings to spec... | |
| variance of +/- 10 Hz with 1 kHz test tone Numbers are basically the same with the phone on the table. Lowpass filtered is:-0.11% / +0.03%Should I have the TTPSU checked by Rega as it is still under warranty? Or, could it be the test record?The GT Reference RP6 subplatter I am using came w... | |
| Home Built Ultrasonic Cleaner Links? | |
| variance of +/- 10 Hz with 1 kHz test tone Yes, I am holding the phone. I will try it stationary next time. | |
| variance of +/- 10 Hz with 1 kHz test tone Second run of over 50 seconds was much better:mean freq: 1001.4 Hzraw freqmax deviation (relative): -.75% / +.68%max deviation (absolute): -7.5 Hz / +6.8 Hzlowpass-filtered freqmax deviation (relative): -.10% / +.05%max deviation (absolute): -1.0 ... | |
| variance of +/- 10 Hz with 1 kHz test tone Correction, speed is fluctuating between 33.27 and 33.43.Here are some more app numbers from the 35 second sampling:mean freq: 1001.3 Hzraw freqmax deviation (relative): -2.76% / +.63%max deviation (absolute): -27.6 Hz / +6.3 Hzlowpass-filtered fr... | |
| variance of +/- 10 Hz with 1 kHz test tone Ok, some new info here. I figured out why the Platter Speed app was not registering. I didn't realize that side 1 of the Clearaudio burn in LP is 45 rpm. Once I set the TTPSU to 45 rmp, the app registered the new data, which follows: - speed varie... | |
| variance of +/- 10 Hz with 1 kHz test tone @Gvasale and @Atmasphere, what is the formula you are using for these calculations? | |
| variance of +/- 10 Hz with 1 kHz test tone Should I try another platter to see if my current factory Rega one is defective? | |
| How much to spend on a decently good phono stage? Jasmine LP 2 mkII - under $600. Beat out the Vincent 2 boxer and the Pro-ject phono tube box. See my threads and system page. | |
| Used VPI Traveler v1 vs. New Rega RP3 Make sure you use adjust dial at the back of the tonearm and not the counterweight itself to set tracking force. | |
| Rega RP6 VTA issue I like my RP6 setup. Non-rega cartridge with no spacers. See my system page. And yes, I do not mess with my setup except maybe the tracking force and antiskate. |