rodman99999
Responses from rodman99999
| Will there be any 'Arrow' mark in a Fuse holder? Another site of interest(especially beginning at the last paragraph of page 2): (http://www.xtremecables.com/PDFsMisc/Furutech_Fuses_User_Testimonials.pdf) | |
| Will there be any 'Arrow' mark in a Fuse holder? A bit of info here, at least about Furutech and Hi-Fi Tuning fuses:(http://www.6moons.com/audioreviews/net/net.html) (http://forum.audiogon.com/cgi-bin/fr.pl?aamps&1261938237) | |
| Need Expert Opinions On An Old System Hard to beat this: (http://www.oppodigital.com/blu-ray-bdp-83/) Hook up the new stuff(amp/sub) before making any other changes. Be certain your speakers and listening position are set up optimally(distances, toe-in, etc). | |
| Opinions on TacT RCS Room Correction System I've been using a TacT RCS 2.2Xaaa for the past six years. My present listening room(a result of an expensive divorce) is an acoustic nightmare. My systems have been actively bi-amped(SS on bottom) since 1980, and(until this room) always provided ... | |
| Is a good soundstage possible with 2 speakers only That Wiki article was good, and it's obvious by the references and the end, that there have been MANY MORE than just, "the Brain at TacTquot;&(Boz) that have been studying Ambiophonics. Actually it's study, together with other Psychoacoustic p... | |
| Problems with room acoustics?? You never mentioned a bass problem, which is what corner and ceiling corner treatments would address. My fave(Auralex), Applied across the wall behind your listening position, will resolve your issue(slap echo/excessive upper mids resonance), ie:(... | |
| Tact 2.2 XP: which configuration to get? If you use an outboard DAC after the TacT; your volume will be limited to the max voltage out of the DAC, and the sensitivity of your power amp(s). Be certain the DAC you intend to use will have sufficient output to drive your amp(s), and provide ... | |
| How international is your system? Since the last time: 3) Zu Mother power cords, 3) Synergistic Research AC Master Couplers(X Series), Wireworld Gold Eclipse 5.2 and Synergistic Research Tesla Apex interconnects for the sound system, an Oppo BDP-83 and PS Audio xStream Statement S... | |
| Fast/Slow fuse? There's no difference in operation the of a fuse, between glass and ceramic. 10A 3AG(31.8mm X 6.4mm) fuses are made in glass, but they are not common. ie:(http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=3SB%2010-ND) | |
| Fast/Slow fuse? How about here: (http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=F2511-ND) (http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=F2647-ND) You have no actual electronics supply houses in your area? Yes- You can... | |
| Fast/Slow fuse? Any REAL electronics supply house, in your area, should have the correct fuses for your equipment. Check your yellow Pages under, 'Electronic Equipment & Supplies'. | |
| pre amp tubes and gain That's true, as the gain is pretty much set by the tube's design parameters. As tubes age though, they lose many other attributes that engage us musically. | |
| pre amp tubes and gain As you mentioned; tuning, tweaking and lowering the distortion levels in your system can also lead to enjoying more realistic(louder) SPLs. | |
| amp clipping or low freq causing pumping speakers If the amp or preamp were motorboating, as in the case of a power supply problem, it would not be restricting to phono playback. | |
| Biamping Dahlquist subwoofer No problem! Enjoy your music. |