rodman99999
Responses from rodman99999
| What is the best sounding amp for Maggies 3.7? Mr A- Here's something else you may consider: (http://www.odysseyaudio.com/products-stratos-mono.html) They have been compared to some of the best SS amps out there and truly shine. What some owners(144) have said: (http://www.audioreview.com/cat/... | |
| Magnepan 1.7s in a 10x13' dedicated room? @Pc123v- I've been addressing my comments to the OP, when you are the current person of interest. Sorry! Tim- Thanks for the wake up call! | |
| Magnepan 1.7s in a 10x13' dedicated room? @Linesource- Consider: (http://www.cnet.com/news/new-sensations-the-radically-different-magnepan-7-speakers/) (http://www.theabsolutesound.com/articles/magnepan-7-loudspeaker/) | |
| Magnepan 1.7s in a 10x13' dedicated room? @Linesource- My present situation requires a listening room quite similar to yours(12 X 13). My listening tastes lean more to realistic SPLs, however. Even at lower listening levels; the room was easily overloaded by reverberation/slap echo, and s... | |
| Magnepan 1.7s in a 10x13' dedicated room? You still are trying to figure your power requirements on a linear scale. Did you even read the treatise I first mentioned? The first two paragraphs following the chart couldn't state it more clearly. Hopefully, Linesource will understand, and not... | |
| Magnepan 1.7s in a 10x13' dedicated room? To double the apparent loudness of a system by 2 times(10db) takes 10 times the power. 3db is about a 1.23 times increase in loudness and the increases are not linear, but- logarithmic. (http://www.cs.sfu.ca/~tamaras/digitalAudio/Linear_vs_logarit... | |
| Magnepan 1.7s in a 10x13' dedicated room? @Linesource & Johnny- You might want to review this paper, regarding Decibels, apparent loudness levels and power requirements: (http://www.gcaudio.com/resources/howtos/voltageloudness.html) | |
| mapleshade ic's... Their catalogs and listening tips are quite amusing. I've found them helpful, when constipated. | |
| Garrard 301/401 audition request What's the current demand for a table that plays 16 & 78 RPM discs, or with an idler wheel drive? There are obviously those that are fond of these tables, but- too few to motivate any current manufacturers. | |
| 1/4'' ding / chip on a glossy black speaker I've found a black Sharpie very valuable for hiding minor dings/scratches in black finishes too. The tough part, personally(being somewhat obsessive), is forgetting about it afterwards. | |
| 1/4'' ding / chip on a glossy black speaker Not a problem, Zd! We're both trying to help the OP. Happy listening! | |
| 1/4'' ding / chip on a glossy black speaker Like I said, "Unless your cabinet is metal: forget about it!" That DOES allow for the possibility of the OP's cabinet being metal. In that case; he would have to have the entire cabinet stripped(sand blasted), as powder coatings cannot be touched ... | |
| 1/4'' ding / chip on a glossy black speaker Enamels and epoxy paints can be applied to any other type of paint. Most enamels don't sand or rub out as nicely though(too soft). Lacquers have more aggressive thinners that will cause problems, if applied to other paint systems. Power coat? LOL!... | |
| La Scala II problem Contact whomever handles Klipsch warranty repairs. | |
| Quicksilver Gold contact enhancer My Quicksilver has stayed fresh for over six years, thus far. The trick is sealing and keeping the small container airtight, with electrical tape, around it's circumference. I also keep my complete kit in a vacuum seal bag(air removed). These guys... |