rauliruegas
Responses from rauliruegas
| Will fine tune adjustments with protractor help with "brightness?" Dear @hdm : You are rigth. The incredible issue is that several audiophiles work with Stevenson A alignment when makes no sense to use it for any one.Btw and only to add that Baerwald is who took the credit for the alignment that has his name whe... | |
| FR66s vs Ikeda IT-407 CR tonearms Dear @nkj : Do it a favor and before you pull the trigger with Stevenson A try to understand how that kind of alignment degerades the cartridge signal against Lófgren A or B.It does not matters which P2S you choosed the Stevenson A alignment has h... | |
| Why are my woofers pumping? Dear @o_holter : Sorry to hear that. That happened to me twice and I remember that in a trip to Houston in a firned home place just when we wanted to listen his great audio system suddenly the stylus tip just " was not there ", by coincide was a ... | |
| Will fine tune adjustments with protractor help with "brightness?" Dear @avanti1960 @ericsch @knollbrent : As other japanese tonearm manufacturers almost always exist some kind of trouble to know in precise way wich kind of alignment used because normally are out of standards.The 1200 is a clear example where if ... | |
| Why are my woofers pumping? Dear @o_holter : "" But the results - so far - are more one of a kind. The Atlas pumps, the others don’t. This makes me suspect suspension wear or some other non-optimal condition in the Atlas. ""As I said in my posts you had to test your Clavis... | |
| Why are my woofers pumping? Dear @o_holter : Nice result you experienced with the Clavis ( that ovbiously is not even a " small " challenge for the great Atlas. ).""" So the "subsonic overwork" of the woofers seems far less. Or mainly absent. """Either the Clavis/Atlas compl... | |
| Will fine tune adjustments with protractor help with "brightness?" Dear @knollbrent: Yes, you need a good protractor like the one you name it.The main reason for that is not onlt to have an accurate alignment but to stay away from Stevenson A alignment type that's what you have now. I totally agree with @lewm an... | |
| Why are my woofers pumping? Dear @o_holter : """ compliance is similar to the Atlas so the test may not tell much........ """"well, you have a " problem " that till today you don't know exactly the reason or reasons for it. You assumed that cartridge/tonearm resonance is ... | |
| Why are my woofers pumping? Dear @o_holter : I think you own a Clavis DC too. Do you already tested with?Characteristics are almost the same as the Atlas regarding resonance frequency calculations. I think you have to test it because you " think " problem is that resoannce f... | |
| Would tonearm with same pivot t9 spindl Dear @radioheadokplayer: The 3P you want has the same P2S distance you are asking for.Btw, how do you know that the 3P is a true/certainty upgrade over your today tonearm?Regards and enjoy the MUSIC NOT DISTORTIONS,R. | |
| Jelco TK-850L review Dear Jelco 750L owners: According with the information in my posts all of you can/could re-align your tonearm to achieve lower distortion alignment levels.Btw, I don't check the other alignment parameters in the other Jelco models but probably sho... | |
| Jelco TK-850L review You only have to be sure that P2S is exactly: 290mm. | |
| Jelco TK-850L review Dear @noromance : There are at least 3 tonearm characteristics than changed in the 850 against the 750: new bearing type ( knife. ), lower vertical bearing sensitivity and lower effective length.All those characteristics are main part of what you ... | |
| SAT 30K+$$ TONEARM: W O R T H T O H A V E I T ? Dear @bimasta: Not exactly as you said. Any one can listen and align any pivoted tonearm taking SAT parameters, independent if the effective length is 9", 10" or 12", por calculations.SAT calculations uses Löfgren A, so instead to use IEC standar... | |
| Replacing Lyra Kleos at end of its life need suggestions as to what next? Dear @radioheadokplayer : Why don't ask directly to the Lyra designer?, you can do it here:https://www.audiogon.com/users/jcarr/feedbacksR. |