rauliruegas
Responses from rauliruegas
| Technics Sp10 Mk2 vs SL-1200G - I finally did an A/B Dear @geoffkait : I'm talking if you can hear adifference and that's all. Did you try it? just do it say: for fun. Maybe we can learn something really important from there.R. | |
| allearts cartridges and rebuilding Dear @harold-not-the-barrel : are you answering a 2002 post? R. | |
| Dynavector cartridges, old and new Dear @bimasta: "" the short cantilever has many obvious advantages ""I don't know what you mean with " obvious " .If shorter cantilever could has " obvious advantages " everyone will design its cartridges with way shorter cantilevers no matter w... | |
| Dynavector cartridges, old and new Dear @harold-not-the-barrel : Fascinating?, that's only the de item bandwidth with out any reference that can tell us is a flat response, normally the deviation is over 3+db. Some Denon cartridges goes to 110khz or Technics to 120khz.Overall desi... | |
| Technics Sp10 Mk2 vs SL-1200G - I finally did an A/B Dear @geoffkait : """ mass hypnosis? """Certainly not, is more like a " stampede " ( literally. ) . Here in Agon exist a second example of audiophile stampede and that was with the Victor TT101 where a gentleman pushed it as something very special... | |
| Dynavector cartridges, old and new Dear @harold-not-the-barrel : Everything the same the XV1s outperforms the 13D as the XV1t too ( and other today cartridges. ) and here we can see that Dynavector choosed a longer cantilever for its top of the line cartridges and not the the shor... | |
| Technics Sp10 Mk2 vs SL-1200G - I finally did an A/B Dear @lewm : In theory in a good electronics design a fuse function is to protect the unit electronics and with no other kind of influence as the quality level unit performance but as your experiences not always is that way at least not with the b... | |
| Dynavector cartridges, old and new Dear @lewm : "" The motion of the stylus has to be transmitted to coils or magnets in order for transduction to occur. ""Rigth and for that happens it needs that exist some kind of compliance for the stylus track LP grooves, normally through a c... | |
| Dynavector cartridges, old and new Dear @harold-not-the-barrel : Yes, the Karat Nova 13D si very good performer in stand alone fashion to look for the adequated headshell where testing it found out the headshell that mate it better.Btw, the first diamond cantilever cartridge was ma... | |
| Grado Labratory Wood Tonearm? 3 questions: Keep it? Sell It? Burn it? Dear @rikintpa: My experiences with Grado tonearm is this model, I owned for some years and it's a good tonearm. I don't know nothing about that wood model you are mentioned:https://www.vinylengine.com/library/grado/signature-laboratory-standard.s... | |
| Valve phono stage @infection: You can choose for the Kleos SL that's even better than the Kleos, your Whest can handle its lower output with no problem.R. | |
| Valve phono stage Dear @infection: No single tube audio item ( everything the same ) can compete with SS designs as your Whest in some critical issues when we are talking of LOMC cartridges: noise levels, distortions levels, frequency response bandwindth, RIAA eq. ... | |
| Good carts with SME V Dear @o_holter : " But I love the Io’s rich sound and am willing to live with some tube noise. """" Bigger, bolder, better able to tackle dynamic music.""" tube noise means higher distortion levels and that rich sound means " tubey ". Live ... | |
| Phono stage inquiry Dear @infection : No, certainly is not normal that hiss/hum you are experienced with your PS ( especially at that " moderated " SPLs. ) that even has a lower noise level than the top of the line Reference in Whest catalog. You unit must be totally... | |
| FR66s vs Ikeda IT-407 CR tonearms Dear @nkj and friends: Please read this post about. That's why makes no sense to any one folows using Stevenson A alignment:https://forum.audiogon.com/discussions/will-fine-tune-adjustments-with-protractor-help-with-brightne...@nkj you can use e... |