rauliruegas
Responses from rauliruegas
| Cartridge Loading- Low output M/C Dear @almarg : I understand all what you posted and that's theory behind.When I said if you have first hand experiences/attest for that what I'm trying to say is that with a normal phono stage design that normally comes with fixed capacitance valu... | |
| Best head amp of the market ? But exist many good alternatives along the ones all of you mentioned to that fabolous Classé Audio headamp like: Denon, Accuphase, Linear Technology,Audio Device, Eureka, Fidelix, Mactone, Pionner, Klyne, Yamaha, Ortofon, Levinson, Mcintosh, Musi... | |
| Best head amp of the market ? Dear @harrylavo: SA-2 the finest?Well, in my first hand experiences because I owned nothing can " touch "/comes close to the Classé Audio NIL-3.Its separated power supply in reality is an amplifier power supply and the separated lectronics comes ... | |
| Soundsmith Optimized Contour Contact Line Stylus for Rebuild Dear @williewonka : Have you idea of the quality level performance or owned the Lyra Clavis DC?You are speaking of the 103 that no matter what is a cartridge that belongs to the mediocrity area against the Lyra the OP is mentioned.Same for you lew... | |
| Cartridge Loading- Low output M/C @krelldog : Some persons think that invented the " black thread ". That atmasphere advice is the same on almost each loading thread from years but in reality does not solves what we are looking for. The theory behind that is true but through sever... | |
| SL1200GAE New Tonearm Dear @invictus005: """ Just because the tonearm cable is copper, it doesn't mean that the silver tonearm wire portion will not have a positive impact. From my experience, it has a very big impact. I use silver plated van den Hul ................... | |
| Soundsmith Optimized Contour Contact Line Stylus for Rebuild Dear @bpoletti: I made the retip of my DC using boron cantilever and as @dgarretson pointed out is the best way to go with that specific Lyra model. I did it with other re-tipper but at the end the issue is that the cantilever must be boron.Regard... | |
| Cartridge Loading- Low output M/C Dear @krelldog : For the first 50-60 hours test it with 100 ohms . During that time is only for the cartridge can overall settle down, after those 50-60 hours you have to re-check the tonearm/cartridge whole set up: overhang, cantilever alignment,... | |
| Cartridge Loading- Low output M/C Dear @atmasphere : The OP is asking for loading and not why many phono stages works in different way when we make load values.Who cares, he as any one of us already owns a phono stage it does not matter what and no one can make a world research t... | |
| SAEC Making Tonearms Again! Dear @perkri: " no shame when insulting anyone who questions, or has an alternate viewpoint to your own. "I don't have a shame because I'm not insulting any one. Ignorant is a person where his knowledge level is really high in a specific regard... | |
| Best head amp of the market ? Dear @harrylavo: Do you took in count that the thread came from 2007 ! ! .R. | |
| Cartridge Loading- Low output M/C Dear @krelldog : I agree with the gentlemans behind 100 ohms very good point to start and I think you will never have to change it. Of course that it's your particular audio system items whom will have the " last word " through your listening expe... | |
| Phono (0.1- 0.22mV+) or step up for LOMC? Dear @korakotta: With out single doubt: Moon 310LP.Regards and enjoy the MUSIC NOT DISTORTIONS,R. | |
| What MC cart would you use with this setup? Dear @malmc02: I like Magnepan, really good design.Now and this is me, before change the cartridge there are two changes I will do it if I was the owner of your system:change the Aria phono stage for a better unit because it does not matters tha... | |
| BaerWald vs VPI setup protractors Dear @slaw : That's precesily what I do each single day_ Enjoy the Music.If you know enough in what ever audio subject and you read a non-sense post as the one by syntax where he only speaks because has mouth but he gave no single fact where he fo... |