imhififan
Responses from imhififan
| This question is aimed to TRUE Elec Engineers, not fuse or wire directionality believers. 1.5V across 6 Ohms = 0.25A or 0.325 Watt Correction: 1.5V across 6 ohms = 0.25A or 0.375 Watt I think the current is pass through the tweeter voice coil and charge up the cap, if there's 80VDC the voice coil will blow in seconds. | |
| This question is aimed to TRUE Elec Engineers, not fuse or wire directionality believers. the driver was working, prior to being connected to a 33uF, non-polarized film cap and a C cell. It was reading 6 Ohms(correct nominal, according to the tweeter’s label), before it opened up. 1.5V across 6 Ohms = 0.25A or 0.325 Watt Back EMF? ... | |
| Thiel Owners Hi andy2, what is your opinion on the 1uF foil caps (C2 and C7), why JT omitted it in the SE crossover? http://www.hifishock.org/galleries/speakers/thiel/cs2.4se-2-thiel.jpg https://www.diyaudio.com/forums/attachments/multi-way/662210d1518507957-t... | |
| Thiel Owners How wide is the slot and how deep from the inside / back to the start of the flare? Is the inside edge eased / rounded in any way? The slot is about 1/2" wide x 12" long, inside the speaker there’s a about 1" thick x 2.5" height wooden wall around... | |
| Leak Stereo 30 integrated amplifier Sorry Ed, my links didn't do any good, it doesn't make sense if I suggests to buy a set of gauge pins just to measuring two holes. Maybe a set of drill pits can give you the measurements needed.Regards | |
| Leak Stereo 30 integrated amplifier Could be this one: https://www.ebay.co.uk/itm/TWO-PIECES-OF-2-PIN-SPEAKER-PLUGS-FOR-VINTAGE-VALVE-AMPLIFIER-/3027846084... Description shown 2.9 and 2.1 mm Dia. and 8 mm apart. | |
| Leak Stereo 30 integrated amplifier https://www.ebay.com/i/232841106775?chn=ps | |
| This question is aimed to TRUE Elec Engineers, not fuse or wire directionality believers. Accuphase http://www.accuphase.com/pdf/p-4500_e.pdf https://www.widescreenaudio.be/wp-content/uploads/2017/11/e-650_protection_circuit_3.jpg | |
| Which amp will cause a larger increase in electric bill? If sitting idle (power on), which will cost more, a class A 100 watt (Threshold) vs a 250 watt A/AB (Threshold)? I have both and a few more. I'm not worried about electric bill, just wondering. Kill A Watt | |
| I want to find these specific knobs https://www.ebay.com/itm/CHROME-KNOB-Vintage-Radio-knob-Station-MID-CENTURY-volume-phonograph-TV-195... | |
| This question is aimed to TRUE Elec Engineers, not fuse or wire directionality believers. I have +/- 90 Volt rails. This is more like it:https://www.mouser.com/ProductDetail/Infineon-Technologies/IPB017N10N5LFATMA1?qs=sGAEpiMZZMshyDBzk1%...100V, 180 amps, 1.5mohms (almost lower than the speaker wire itself), about 80 nanosecond t... | |
| This question is aimed to TRUE Elec Engineers, not fuse or wire directionality believers. https://www.diyaudio.com/forums/solid-state/295884-speaker-protection-upc1237-mosfet.html https://www.infineon.com/dgdl/Infineon-IPP_I_110N20N3G_IPB107N20N3G-DS-v02_03-en.pdf?fileId=db3a3043... | |
| what to do with a 25 POUND subwoofer magnet-- broken intermezzo basket Make a giant magnetic isolation feet/stand? | |
| Mounting a cartridge https://www.sound-smith.com/tags/cartridge-installation https://www.youtube.com/watch?v=6XSxBSsOrB4 Google it, a lot of info for you to check it out. | |
| Pre amps and turntables if it is possible to plug a turntable directly into a Cambridge Audio Stream magic 6 which has a built in pre amp. You need a turntable with digital output: https://www.project-audio.com/en/product/essential-iii-digital/ |