imhififan
Responses from imhififan
Tube amp bias adjustment advice If I could post a picture it would be much easier but I don’t see an option in Audiogon You can post picture via Systems page https://systems.audiogon.com/ I must have hearing loss out of my right ear because I noticed no difference. I will b... | |
Plinius noise with balanced cables What Plinius gear you have? CD player, DAC, Integrated or preamp? Can you provide more info of you setup? | |
What is the best setup for my system? bkeske, great idea! A stylus scale is more accurate and cheaper too, definitely worth a try if heavy counterweight is not available. The cartridge’s specs say its impedance is 1.2 kohms, so I tried it with the 1kohms pin #5 turned on and it didn’... | |
What is the best setup for my system? 1. You need a 75g counterweight. http://tools.project-audio.com/counterweights.aspx?ttline=11&tt=123&tonearm=587 2,3 & 4. Before answering those questions, need to know what cartridge? Ortofon 2M Bronze, M3 Bronze or M3 Red??? L... | |
Tube amp bias adjustment advice Have you try swap the tube from left to right? | |
I really wanted to dislike D'Agostino Hi Erik, I like to suggest that you auditing some current CODA amplifiers too, it may change your impression as well... | |
Is there anyway to convert a JL Sub to connect to Main speakers? @ozzy Before the Jensen SP-2SX arrive, I suggest you take a moment go through the manual and see if you have any questions about the installation and also get all cables that required. https://www.jensen-transformers.com/wp-content/uploads/2014... | |
Accuphase E-260 Voltage Conversion (100V to 230V) Do you also suggest changing the fuse and amplifier power cable to meet new current requirements? I am not able to locate the fuse though. Yes, for safety reason, changing the main fuse is a must! Usually you can find the fuse on the power switch ... | |
Help finding rail fuses in an old B&K power amp That said, the rail fuses are most certainly not the problem. + 1 | |
Accuphase E-260 Voltage Conversion (100V to 230V) https://www.stereo.net.au/forums/uploads/monthly_06_2014/post-116892-0-01154100-1402272457_thumb.jpg | |
Is there anyway to convert a JL Sub to connect to Main speakers? JL Audio make a active speaker level to line output converter LoC-22 https://www.jlaudio.com/products/loc-22-car-audio-oem-integration-processors-98413 Jensn Transformers also offer a passive speaker to line level converter https://www.jensen-tran... | |
Musical Fidelity Phono preamp loading http://www.salonav.com/wp-content/uploads/2016/12/05-1.jpg That is a 47pF cap and the "K" is the tolerance of 10% http://kaizerpowerelectronics.dk/theory/capacitor-code-table/ | |
Trigger Trouble Glad I could help | |
Trigger Trouble I found an error on the Parasound A21 manual page 8: " 2. Plug the other end of this wire into the external DC source. " the picture shown the control component plug into the " INPUT " The correct connection should be connect the 3.5mm 12V trigge... | |
Luxman LV-117 volume potmeter It’s almost impossible to find a 150KB stereo pot with center tap, if you omit the loudness control, the ALPS RK27 100KAx2 pot recommended by georgehifi should work. Or you can use a 23-position 2 deck switch with 22x6.8KΩ resistors in series on e... |