imhififan
Responses from imhififan
| Is a Power Amp the Answer? Those 6" drivers had its limitations, you need a outboard crossover or a sub-woofer with speaker level in/out (like the http://www.crutchfield.com/S-G4VccyGdddm/p_735PSUB1KB/Definitive-Technology-ProSub-1000.html) to cutoff the low frequency (50-... | |
| Is a Power Amp the Answer? Your GoldenEar Triton Five doesn't need 300w of power, add a subwoofer or two to your system is the answer. | |
| Tonearm for Luxman PD 441 Fidelity Research FR-64 had the same 230mm mounting distance , is a drop in replacement of the DA307. | |
| Best car audio, Burmester? highly disapointed This one from Automobile magazine:Sonic Booms: Putting 8 of the Best Car Audio Systems to the Test | |
| Best car audio, Burmester? highly disapointed Who Makes The Best Luxury Car Audio System?Read more at http://www.soundandvision.com/content/sound-wheels-who-makes-best-luxury-car-audio-system#M7eVvLboMa... | |
| is it ok to leave a tube amp on without speakers connected Maybe this one worth reading | |
| will using rca connector degrade sound quality? If your powered subwoofer only has line level input, a speaker to rca (line level) converter will be needed. How much its degraded the sound is depend on the quality of the converter. | |
| will using rca connector degrade sound quality? What subwoofer you want to connect to it? You need a powered subwoofer with high level (speaker level) input parallel connect to the speaker terminal. | |
| George-Warren Turntable I think member "winggo" is George, google found George Warren Precision Sound address: 5400, N 7th Ave, Sioux Falls, SD 57104Tel no: (605) 335-5925 | |
| Bi-Amping Paradigm speakers Are you sure the RCA pre-out cannot use for Bi-Amp setting? If you have the cables on hand, why not give it a try. | |
| Are there used/mint balanced pre-amp with a few unblanced inputs under $2000?? Cambridge Audio Azur 851E | |
| NAD 7140 repair-HELP http://home.windstream.net/wbittle1/vaud5.htmIf I were you, after cleaned the speaker selector, relay contacts etc, if the amp section still not working, I will leave it as is, find a cheap used Adcom, B&k or Parsound power amp to pair with it... | |
| NAD 7140 repair-HELP Those fuses for tuner section only.If both channel of Amp section not working, start with power supply to diagnose. You can download service manual from http://www.vintageshifi.com/repertoire-pdf/Nad.php | |
| Help With 60Hz Hum PLEASE "7. Switched between XLR and UNBALANCED (THE UNBALANCED CONNECTION WAS A BIT WORSE)"I missed this line, my bad.THE UNBALANCED CONNECTION WAS A BIT WORSE because of the 7805 has higher gain on unbalanced input.You have a noisy 8801?Disconnect a... | |
| Help With 60Hz Hum PLEASE Did you try using RCA connections from 8801 to 7805?The 7805 has very low input impedance on Xlr. |