dover

Responses from dover

Phono Stage upgrade to complement Dohmann Helix One Mk 2
Interesting - I don't profess to know much about AnalogMagik, but a cursory look raises a few issues that I think could be cause for concern - AudioMagik believes the optimal gain level is the one which yields the highest Signal to Noise ratio."... 
Anyone Bi-Amping Tannoy Westminster GR’s?
No, but I have experimented with Canterbury SE's - Tried the following configurations - Single amps single wired Single amps bi-wired Identical amps passively bi-amped Best by miles was single amp/single wire. Bi-wiring and passive bi-amping ... 
Will rebuilt Quad ESL 57s take the place on a great $30K dynamic speaker?
My best result with Quad 57's was as follows - Remove steel grils Put them on stands about 18"  off the floor Tilt the panels up to more vertical and angle in slightly Amps - tried a few best by miles was Quicksiver 8417's - could go loud with... 
How do you organize all this turntable paraphernalia??
@noromance  I only own the TT. Cant afford the speakers.  
How do you organize all this turntable paraphernalia??
@mijostyn  No just an all wheel drive Subaru - its great on wet roads. I use to have the original  Audi Quattro Turbo Coupe & S3 - can't go back to 2 wheel drive. Nobody on this forum will ever understand how good my TT is because there was ... 
How do you organize all this turntable paraphernalia??
I have mirrors, record clamps, stylus brushes, record anti-static and multiple headshells/cartridges, level, screwdriver, tweezers etc. I also wouldn't mind having a rack to display what is currently playing. You should count yourself lucky - m... 
New 55,000 Euro tonearm
@pindac  I own many classic/vntage arms as well as modern, some modified. The main issue with classic arms such as the FR64S/SME3012R most of the Micro Seiki arms and SAEC arms, and others of that era that are now popular are the non offset bear... 
New 55,000 Euro tonearm
You don’t like Technics but other than the AT 1100 has the lower friction bearing levels that any non-unipivot tonearm and not even a bat can hear that " rattling " you are talking about . I never said I disliked the Technics. but I would not u... 
Micro-Seiki RX-5000 platter question
@hifiguys  Sounds good. Platter mats are always a subject of debate. I keep on hand Micro 180, Final Audio ( 4.5kg chrome copper ), Goldmund Methacrelate/Clamp, SAEC 300, Seisin and a few others. I keep them all because really the "best" mat ca... 
New 55,000 Euro tonearm
 I already said twice: an unipivot characteristic is its aliveness that in reality is higher distortion, you can’t do nothing about. This is hilarious - the funniest comment I've seen this year. Of course most cartridges have a cantilever that... 
New 55,000 Euro tonearm
At the end is an unipivot design and all kind of developed distortions pass trhough the pivot trhough one single " point " with no real opportunity to dissipates it and the developed feedback pass trough that single " point " when in a gimball th... 
2020 update : JC Verdier La Platine
@newtoncr  I have a lot of tube gear - tubes themselves are a near perfect antenna. I would be surprised if the magnetic platter caused noise - more likely to distort low level signals - if you could even hear it. You could put a metal plate (no... 
2020 update : JC Verdier La Platine
@newtoncr  I had a Platine Verdier - the magnetic fields are vertical from memory and contained  - so as long as the RTR is off to the side ( not above or below ) there should be no issue. Having said that I rebuilt a Garrard 301 which outperfor... 
My Sonic Labs cartridges
@yeti42  I'm glad you posted this - There is a metallic colouration in their demo room which I thought was the Thrax speakers and it was at its least intrusive with the Dohmann. I’ve since heard Stenheim speakers in the same room with Thrax and... 
New 55,000 Euro tonearm
@lewm Primary Control also produce a version of the FCL arm with permanent magnets - the Gravity - at a lower price point. With regard to the Phantom - I chose the Naim Aro over it many years ago for several reasons - The Phantom unipivot bear...