ditusa
Responses from ditusa
| Low gain preamp options @cat_doorman,This is the preamp that includes all the desired features that you list in your post. btw, I have speakers that have efficiency >2.6%. So i understand the need for controlling gain i.e. Voltage in audio components. It is very impor... | |
| Looking for my Final Pair!! @dave_b, JBL M-2. | |
| Horn speakers , high efficiency but not “shouty” I concur, with johnk. | |
| Speaker terminal polarity Standing, in back of the amp the right speaker terminal is +red. https://www.usaudiomart.com/details/649055254-cary_audio_cad300se_signature_monoblock_amplifiers/ima... | |
| JBL 4430 placement - please help if you know this speaker Inside. Says jbl. | |
| "Amplifier Noise Floor" and hum acceptable? @jwl244, OK. When you changed your receptacle to the new Hubbell did you cheek the Hubbell for phase. If you reverse the... | |
| Dedicated power @mofojo: Run a 10/awg BX/MC cable solid core conductors from the breaker panel to a metal receptacle box. The metal sheathing on the BX/MC cable absorbs the (EF)) electric fields emitted by the wires and shunts it to ground. Now from panel to plu... | |
| Dedicated circuit I concur with jea48. | |
| change amps or speakers @ majorc I would go with the quicksilver line stage it has 18 dB of gain to drive your amps to a full 60 watt output. I use a schiit freya+ preamp to drive my amps. good luck. :-) | |
| change amps or speakers @majorc I could be wrong but I think that pre-amp (sonic frontiers anthem pre1P) is a phono stage pre-amp but I think you need a line stage pre-amp which is why it didnt sound right... | |
| change amps or speakers @ majorc I have a pair of quicksilver amps, the silver sixty's, I use them to drive my 4425 monitors. And they sound fantastic. They are very dynamic amps. You have a great pair of amps. Amp and speakers should match. The 4425 monitors are 8 Ohm a... | |
| As much as I try, I just don't get it........ @eganmedia I concur,100%. | |
| Do pure copper banana plugs make a difference in the quality of the speaker sound. @ johnspain As the poster above said "go commando", I agree!For good sound quality go bare wire, tinned at both speaker and amp ends. Make sure both ends are very tight which is more important to sound quality then any connector will be. | |
| Adding a sub woofer? @ ieales, Well said. | |
| Benefit of shielded ac wire? Any downside? @ptss: Run a 10/awg BX- cable solid core conductor from the breaker panel to a metal receptacle box. The metal sheathing on the BX-cable absorbs the (EF)) electric fields emitted by the wires and shunts it to ground. Now from panel to plug is shie... |