Tube Amp recommendation for Quad 988

I heard those speakers with a Cary V12 at a Montreal show. Very nice indeed. So when I see there's a pair of AES Six Pack monoblocks posted here, I think, oh, those might be worth considering.

I use a pair of Audio Space Nova M34 monoblocks myself. Haven't heard them with any electrostats.

When I had the 988's, I tried a number of amps: EAR 509ii's (509 tube), Wolcott Stereo-220 (EL34), Quicksilver Triodes (6C33C), Cary SLM-100 (EL34/KT88/6550), Cary SLM-70 (EL34/KT88/6550), Odyssey Stratos Dual Mono, Aragon 2004, and I can't remember how many others! For the tubes, I ended up keeping the SLM-70's. They were modified to be switchable b/t triode and pentode. They had the nicest tonal balance and inner detail of all the tube amps listed. (Disclosure - I am soon to list these on Agon, as I sold the Quads a couple years ago.) A real sleeper with the 988's was the Aragon. It didn't have quite the beautiful mids and tonal balance of the Cary's, but it had great dynamic drive and spatial resolution. For $1200 it makes a great summer amp, or backup amp!

One other peice of advise on the 988's. They are not the most dynamic speakers, so you want to have really dynamic gear upstream. Swapping my Audible Illusions 3a preamp for a Cat Ultimate brought a great improvement. Also, good power cords on the speakers made an audible improvement (I made DIY cords based on a Chris VanHaus design). I also liked raising the speakers by about 10" on solid wood blocks (big beams cut 26" long) to improve the imaging - any higher yielded too much loss in bass.

Best, Peter

By the way, my very first experience with Quad speakers were with Conrad Johnson MV60 tube amps, and CJ CT6 Preamps. I sat in the store for almost half an hour listening to this setup. And, I found the experience very easy and comforting.

Does anyone have any opinion on the CJ MV60's?

Coincidently, one of my more recent experiences with Quads (2905’s) was listening to them in a store with the MV 60 and CT6. Did you hear them in a store in Baltimore by chance? At the time I already owned the CT6 with a pair of Music Reference RM 10 amps. At the time I was also considering moving to Quads since the Music Reference amps are voiced with Quads and I was told a very good match. Well not only did I pick-up a pair of 63’s shortly thereafter which sounded quite good with the Music Reference amps, but I then picked-up a pair of CJ Premier 12’s.

To answer your last question, IMO the MV 60 and CT 6 are a very good match, at least with the 2905’s, and I would assume with the 988’s as well. However, to answer your original post, I can highly recommend the Premier 12 mono blocks with the CT6 and Quads. In my more than 40 years in this hobby, it is one of the most musical and satisfying combinations that I have ever owned.

Thanks for the suggestion on the Premier 12 mono blocks. Based on all the reviews that I have read, it sounds like a good match for my setup. I ended up purchasing a brand new CJ CT6, and now my budget for the tube amp is at the lower end of the range. Leaning towards used MV60 for now. Not sure if I should go for used MV60SE.

I live in Northern NJ, and heard the combo setup at a nearby dealer.