ARC Ref 3: Tung-Sol 6550 in power supply?


I have sourced a new production Tungsol 6550 from The Tube Store in Hamilton (Ontario); I intend to use it in the power supply of my ARC Ref 3. Has anyone had any experience with the Tung-Sol TS6550 in the Ref 3? Have you compared it with the original Winged "C" SED 6550C shipped by ARC with this
line stage? Preferences? Reasons?

See:
http://thetubestore.com/tungsol6550.html
guidocorona
Let's hope Kevin's current batch isn't the one I've been sampling over the past 2 years. I've bought at least 10 pairs from Upscale! There aren't a lot of reasonably priced and trustworthy sources for these.
I've bought quite a few cryo'ed Sovtek 6H30pi tubes from Kevin. They work just fine. This is the first time I heard about issues with the SED "Winged C" 6550s and I've bought quite a few from Kevin over the years. So I wouldn't worry.

I seem to recall that Kevin told me some time ago that he sourced a bunch of the "original" issue SED "Winged C" 6550s in Europe or Transylvania or someplace like that. As you probably know, the old Svetlana (sp?) plant burned down. So no more "original" "Winged C" 6550s anymore.

Here's my issue. My ARC Ref 150 amp eats KT-120 tubes every 2000 hours. ARC charges $100 per tube. Ouch! Kevin and most other vendors charge half that amount. As you know, Kevin does a heck of a job burning in and testing his tubes. And so does ARC.

My dilemna is the matching process. ARC matched power tubes have always been an easy drop in. They bias easily and chnage bias evenly. By contrast, Kevin's match KT-120s are not as consistent. Some pairs match pretty closely and other pairs not so closely. I don't know why. So I may have to go back to ARC.

Cheers.
My ARC Ref 3 approached 2000 hours. I obtained a 6550 tube from ARC. Upon replacement, it was alarming to find that the Sovtek 6550 WE could not produce the ambience of the original SED Winged C 6550. The soundstage shrank notably and the new tube sounded sterile. I reckoned that burn in was unlikely to change the character much and removed the Sovtek and put the SED back. I ordered a Winged C 6550 from Kevin Deal. He was credible and advised that his batch was suitable for Primaluna, not the more demanding ARC. I decided not to chance it even for a regulator. Not satisfied with the remaining options of the allegedly unreliable JJ 6550 and the pricy and sonically unproven Black Sable SED 6550, I turned to Vintage Tube Service to try an NOS Tungsol 6550 but found it unavailable.

I noted a buzz in various forums about the nice qualities of Shuguang's black Treasure KT88Z and in particular the improved Psvane gray KT88T Mk II. I spoke with Kalvin Dahl of ARC concerning rolling tubes. He was most supportive and believed that KT 88 could be a substitute but the warmer sound might differ from the original Winged C and the larger size would be a tight fit. I ordered the gray Psvane KT88T from an eBay seller ListeningChina recommended by Michael Samra on Tube Asylum. The tubes in a thorough package arrived in about a week. I have been listening to the new tube since last evening. Even brand new, the quiet Psvane KT88 clearly produced a tightly woven, wider stage and more layered depth plane along with exquisite high frequencies and bigger, rounder bass. I go through familiar disks successively to confirm the qualities and am continuously impressed with the rich tones. Instruments and voices have more bodies and string tones are lovely. This tube is about as extended at both ends as the Winged C and surpasses it in musicality. The trade off might be that the Winged C has more dryer low end impact. Unlike the Sovtek which I impatiently removed in 4 hours, the Psvane sounds both more powerful and delicate than the Winged C. I realize that the Winged C will not go back in any more. I have done some tweaks lately including a decent power conditioner, Stillpoint and Townshend footers, this single Psvane tube surprisingly produced the most pleasing improvement. The result is musical aside from hifi qualities. I have been tentatively in the market for a replacement of the Ref 3 with 5 SE. My previous audition of the 5SE did not impress me as much as this tube change. I am sharing the experience with those who are also dissatisfied with the current choices of the Ref 3/5 regulator. I was nervous as ARC was adamant before about not rolling with a KT88. I am happy to report the recent ARC change and my encouraging findings.

Now there are some shortcomings. This particular KT88 is wider and longer. The length requires slight bending of a small capacitor behind the display such that it does not touch the tube. Ref 5 owners with a horizontal board may not have the same issue. Further, one of the matched pair arrived with the getter flash largely vanishing and turning milky. ListeningChina communicated promptly and sent out a matched replacement today. So the Psvane QC may not be as solid as the Russian crowd yet. Given the remarkable sound quality, I will not hesitate to continue using Psvane tubes especially if I can monitor the conditions with a tester.
In Ref 3, the SED Winged C 6550 from ARC takes almost 500 hours to break in fully... Sonic evolution is very significant during this period. What I herd from a brand new tube was not indicative of its capabilities post break-in. G.