Static / Fuzzy Sound in Speakers

Ive checked piece by piece like you recommended Aragain.

With the amp only on, you can hear a faint noise. But you really have to stick your hear to the speakers in order to hear it. Very minimum.

With the cables on and no CDPlayer, no change.

When i power up the CDplayer, the fuzzy / snowy sound goes up noticeably.

However in checking with the other systems in my house (2) which are arguably less 'audiophile' than this one, i constantly hear this noise when sticking my ears to the speakers.

Is this a sound that every speaker makes when the power to the Amp and CDP are turned on ? Or should the speakers be dead quiet ?

Cheers

Have only auditioned a 850 (doesn't have the digital inputs of your 861) but it was dead quite. Does owners manual for the 861 recommend any shorting pins for the 861's inputs? Might also want to email/call Wadia Customer support. I wouldn't try shorting pins in your amp unless specifically recommended by your amp manufacturer.

Ok did some more testing and i am now puzzled.

I have a crappy Sony Integrated downstairs so i decided to use it in order to try and isolate the fault, as i was pretty confident it wasnt coming from the Wadia.

So i hooked up the integrated with the Wadia : and low and behold i was right, there was no fuzzy / snowy sound. Hmm.

I then decide to use the integrated as a preamp, and hook it up with the Odyssey stratos to see if the amp was the problem. Again, nothing, dead quiet.

The only time i had this surface low fuzzy / snowy noise was when i used the Wadia DIRECTLY into the Odyssey. I used the same cables each time, with exactly the same routine -> Amp and preamp first, Wadia last powered up. And as soon as the Wadia direct in the Odyssey made that clicking noise after booting up signaling that it was ready to go, that bloody surface noise poped up.

Where could this be coming from i dont know. But i know i cant stand that low surface noise.

Guess ill have to get my hand on a preamp :(

Cheers

Another thing to try...

See what happens when only one cable is connected to the cd player. If you don't hear the sound then this is probably what is called a ground loop problem.

It is suspicious that you have this problem in multiple systems in your house. This tends to point to something other than specific equipment - like the wiring in the house.

I am also curious as to your description of the sound as "static/fuzzy". Usually ground problems would be described as a "buzz". Static is the sound of a radio between stations, something like the sound of the ocean. A buzz is a different kind of noise.

There are inexpensive gizmos available at hardware stores that plug into an outlet and tell you if the outlet is wired properly. Would'nt hurt to find out.

The saga continues..

Ground loop problem ? What is that ?

I was wrong in my imagery anyway : the sound i am hearing is definitely what you would call Static.

Im not to sure, but if you put your hear real close to your speakers, when the system is on but not playing anything, shouldn't you hear just the tiny bit of static ? Or should it be dead quiet ?

Ill probably get myself those gizmos you talk about, but i still dont get it why it is worse when i plug my CDP directly into the amp, and not the other two cases (amp + pre + CDP, integrated + CDP ).

Cheers
Xav