If you can solder, the Hagerman Cornet kit is an exceptional value. When I got back into vinyl, this is the unit that got me listening to classical on vinyl rather then CD.
Need an Entry Level Phono Preamp
Well, it's been 22 years and I'd like to go back and spin some vinyl. I'm considering a Cambridge 640P and a Rega Fono for a Shure V-15 VMR on either an old Dual CS5000 or Thorens TD160. I was ready to buy the Bellari but the 60Hz hum problem I heard about here on A'gon scared me away. I just want to listen to my old records, not troubleshoot ground loops. Also considered tubes from an AES PH-1 and the new Pro-Ject Tube Box II. OK, let's through in the Jolida JD-9A for kicks. That's a price range from $169 to about $550 which is fine. Line Pre is a Bryston BP-25.
I welcome your comments and recommendations. Oh, I listen primarily to classical music. Someone has to keep it alive!
Thanks!
I welcome your comments and recommendations. Oh, I listen primarily to classical music. Someone has to keep it alive!
Thanks!
- ...
- 23 posts total
Av2k, Bryston does have a phono card for the BP-25 as witnessed in this ad. Since people are selling used BP-25's w/ phono, you know Bryston makes them. Give them a call. |
About the AES PH-1. Like any other electronics it has its strenghts and short-comings. Which ever you end up with will depend solely on what you are willing to compromise. The ph-1 is a solid performer considering what it can deliver with its price/performance ratio. Audio Asylum has a lot of discussions with mixed reviews (IMHO).(From my experience) It will give you prat and the musicality of tubes . Have the flexibility to tailor the sound by tube-rolling. One minor (for me)thing worth mentioning (from my expereince and forums)is a slight HUM at high volume (85% volume setting and above). This hum can also vary depending on which MM cartridge use and how good the unit is built and placed. I've read varying reviews/coments from being very quiet to audible hum at listening levels. If you decide to try the PH-1 may I suggest to get a factory-built unit with the upgrades (and a 30 day return policy if possible). I believe Upscale Audio still sells them at $599.00 (last time I checked). But if you check the AES/Cary website the price is bumped-up to $900. I've had mine since 2002 and very happy with it. I can only compare it with SS phono preamps (Luxman Tp117 and 1 unknown brand I still use for sanity check :^) The Ph-1 has that nice bloom at the mids. I use an LP12TT/grado gold cart. Try to use a MM cartridge with at least 5 mv output as the PH-1 has a gain of only 36dB. A 6.5mv output MM cartridge would be the ideal match for this Phono preamp. For more info on cartridge/phono preamp matching visit "KAB" website. Just my 2 cents. Hope this helps. |
I heard back from Bryston about a phono stage for the BP25. They do the mod at the factory for $600 plus shipping costs. That seems fair but I just had my BP25 serviced and tested in July. It's perfect. I'd rather not part with it at this point. So I'm back to an outboard phono stage. But I did some homework and I find that I need 47 kOhms impedance input with a 100pF capacitive load for my Shure V-15 VMR. Gain should be at least 39dB. So now it comes down to the sound. The new Pro-ject Tube Box MKII looks interesting with two 12AX7A output tubes. Gain stage is probably op amps. On the cheap, the Parasound zPhono meets the requirement. Class C rated and all that. Rega Fono MM and the Cambridge 640P are options too. Let's see....what else is out there? Do any of the above stand out as a decent phono stage for an old Thorens table with the Shure cartridge. I also have a high output MC Adcom Cross Coil hiding somewhere too. Or, I save a little more and go for the Dynavector? |
- 23 posts total